evaluation of the effect of welding parameters on the residual stresses in dissimilar welding of high strength steels
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,094
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_015
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
for many years the use of high strength steels in consturction is increasing due to high ratio of strength to weight and cost considerations these properties reduce the fabrication cost and time to make use of these advantages of these modern steels their weldability was extensively evaluated in the present study a dissimilar patch welds between two high strength steels was investigated a series of dissimilar steels joints based on the S600MC as the base plate and s355 as the patch plate were produced using robotic MIG welding residual stresses were determined using the x-ray diffraction XRD the effect of welding speed and sequence on residual stresses distribution in two different patch shapes was studied analysis of the results revealed that using of the welds in opposite directions reduces the welding stresses and the effect of welding speed is different in two pathc shapes.
کلیدواژه ها:
نویسندگان
e ranjbarnodeh
sharif university
a fischer
university of duisburg essen germany
a.h kokabi
sharif university
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :