investigations on the effects of process parameters for Nd:YAG pulsed laser welding of Cu-6% Mn-6%Ni ALLOY
محل انتشار: کنگره بین المللی جوش و روشهای اتصال
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,310
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIWC01_043
تاریخ نمایه سازی: 6 مهر 1391
چکیده مقاله:
Nd:YAG laser beam LB welding is conducted on Cu-6% Mn-6%Ni alloy sheets at different welding parameters studeis were focuses on the effects of laser power on the depth of the welds the results show that weld depth increase with laser power in this study the pulsed Nd:YAG laser with moderate power of 80w was used microstructures of the welded joints were investigated by the optical microscopy OM SCANNING ELECTRON microscopy SEM energy dispersive x-ray spectroscopy EDS and micro hardness test very fine dendritic micro structure is achieved in the weld zone. the reason is attributed to the higher cooling rate in the laser welding process
کلیدواژه ها:
نویسندگان
a.r sufizadeh
university college of engineering
s.a.a akbari mousavi
university of tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :