Experimental Investigation on Quasi-Static Impact Response of Glass/Epoxy Composite Corrugated Core Sandwich Panels
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 110
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MACS-10-2_006
تاریخ نمایه سازی: 9 اردیبهشت 1402
چکیده مقاله:
Composite sandwich structures are vastly utilized in the transportation and aerospace industries as highly effective energy absorbers. This paper aims to study a comparative study on the role of the composite corrugated sheet as a core in sandwich panels under low-velocity loading conditions. In this regard, three types of sandwich structures with different corrugated cores, including three unit cells that have identical mass and mechanical properties, are designed and manufactured. The material system utilized for the face skins and core is woven E-glass/epoxy. Corrugated cores are fabricated using specially designed molds and press techniques and afterward bonded to face sheets for the production of corrugated sandwich panels. In the following, by performing the compression tests on corrugated sandwich panels, the impact response, failure modes, and energy absorption ability for different core shapes are explored. The results reveal that the sandwich panels with the rectangular core have a higher capacity in load carrying and energy absorption than the triangular and arc-shaped cores. It is found that the composite sandwich panels with a rectangular profile increased by ۱.۱۴ and ۳ times in the SEA compared to the other two types of profiles. It is also observed that the initial mode of failure in these core geometries is buckling of cell walls, and continued loading leads to the fracture of the cell walls (fiber breaking), delamination, and debonding between face sheets and core. The present results provide valuable information on corrugated configurations in the design of sandwich structures and engineering applications.
کلیدواژه ها:
نویسندگان
Mohsen Azizi
Faculty of Aerospace Engineering, Malek-Ashtar University of Technology, Tehran, Iran
Ali Choopanian Benis
Faculty of Aerospace Engineering, Malek-Ashtar University of Technology, Tehran, Iran
Mehdi Vaezi
Faculty of Aerospace Engineering, Malek-Ashtar University of Technology, Tehran, Iran
Majid Jamal-Omidi
Faculty of Aerospace Engineering, Malek-Ashtar University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :