Investigation of the Coating Methods and Types of Coatings Containing Hydroxyapatite for Applications in Tissue Engineering
محل انتشار: مجله سرامیک های پیشرفته، دوره: 8، شماره: 4
سال انتشار: 1401
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 150
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ACERPT-8-4_004
تاریخ نمایه سازی: 11 اردیبهشت 1402
چکیده مقاله:
In recent years, application of Hydroxyapatite (HA) as the coating on metal substrates for biological stabilization of implants, stimulation of bone growth around the implant, and optimization of recovery time has attracted the attention of many researchers around the world. In this regard, the current study presented a review of HA and its composite coatings for tissue engineering applications. HA is one of the bioceramics that has been an interesting subject of research in recent years owing to its in-vitro bioactivity, osteoinduction, and osteoconduction properties. According to the previous reports, coated implants were performed successfully to achieve high corrosion resistance, bone growth and regeneration, and reduction of corrosion current density. The current research presented a review of the previous research works on the coating mechanism, physico-mechanical, in-vitro bioactivity, and biocompatibility properties of HA and its composite coatings on substrates. The obtained results revealed that HA and its composites had a synergistic effect on the metal substrates in terms of improving corrosion resistance, providing biocompatibility, direct bonding to tissue, accelerating treatment, and reducing costs imposed on the health care sector.
کلیدواژه ها:
نویسندگان
Behnam Doudkanlouy Milan
MS Student, Department of Materials Engineering, Faculty of Engineering, Urmia University, Urmia, West Azerbaijan, Iran
Hurieh Mohammadzadeh
Assistant Professor, Department of Materials Engineering, Faculty of Engineering, Urmia University, Urmia, West Azerbaijan, Iran
Robabeh Jafari
Assistant Professor, Department of Materials Engineering, Faculty of Engineering, Urmia University, Urmia, West Azerbaijan, Iran
Mohammad Soltani
PhD Candidate, Department of Materials Engineering, Faculty of Engineering, Tarbiat Modares Universirty, Tehran, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :