Modeling and Numerical Analysis of Through-Column Connection of Steel Beam to Reinforced Concrete Column
محل انتشار: نهمین کنگره بین الملی مهندسی عمران
سال انتشار: 1391
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,082
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCE09_451
تاریخ نمایه سازی: 7 مهر 1391
چکیده مقاله:
A total of three beam-to-column joints for composite structural systems consisting of reinforced concrete columns and steel (RCS) beams, which are referred to as ‘‘composite RCS systems,’’ were modeled to investigate the structural performance between the two numerical and experimental models. The joint details examined were ‘‘through-column type,’’ of which the joints are reinforced by cover plates and horizontal stiffeners without beam flanges. Nonlinear finite element analyses of the models were carriedout under monotonic and cyclic loadings using ABAQUS. This paper indicates that the use of thicker inner steel panel and cover plates are effective to enhance the structural performance of the joints. Furthermore, the steel panel embedded in the concrete column has much greater effect on the total capacity of the joint.
کلیدواژه ها:
نویسندگان
Pouya Pouladi
M.S. Student of Structural Engineering at University of Tehran
Seyed Rasoul Mirghaderi
Assistant Professor of Civil Engineering at University of Tehran