Simulation and Optimization of CO۲ Removal in Ethane Refining Plant Based on Aspen HYSYS and Box-Behnken Design Method
سال انتشار: 1401
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 176
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OGPC04_138
تاریخ نمایه سازی: 25 اردیبهشت 1402
چکیده مقاله:
The CO۲ removal process in the ethane refining plant is simulated using ASPEN HYSYS software. The simulation is validated by industrial data of Kangan Petro Refining Co (KPRC). In addition, the Box-Behnken design method is conducted to optimize the CO۲ removal from ethane using activated methyldiethanolamine (aMDEA). The operating parameters, including absorption temperature, absorption pressure, aMDEA concentration and aMDEA flow rate are investigated as independent parameters. Analyzing absorption temperature demonstrates that increasing temperature from ۴۸˚C to ۷۲˚C causes a decrease in CO۲ absorption performance. aMDEA concentration and flow rate have less effect on the performance of CO۲ absorption at lower temperatures, while at higher temperatures (above ۶۶˚C), increasing aMDEA concentration and flow rate increase the CO۲ absorption performance significantly. The absorption pressure has fewer effects on this process. In addition, an optimization study using desired function methodology is performed and the optimal operating conditions to minimize CO۲ mass fraction in ethane product are determined.
کلیدواژه ها:
نویسندگان
Ahmad Panjehshahin
Kangan Petro-Refining Complex, Asaluyeh, Iran
Farzad Bastan
Department of Chemical and Petroleum Engineering, Sharif University of Technology, Tehran, Iran
Mahdi Zamani
Kangan Petro-Refining Complex, Asaluyeh, Iran