Evaluation of Pozzolanic Activity of Two Different Types of C and F Fly Ashes with Fineness Factor
محل انتشار: مجله معدن و محیط زیست، دوره: 14، شماره: 2
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 98
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-14-2_005
تاریخ نمایه سازی: 28 خرداد 1402
چکیده مقاله:
Today, energy produced from coal is economical compared to other sources but it faces a very serious waste problem. However, these wastes are evaluated by using them as mineral additives in cement, which leads to lower cement costs, saving resources, producing environmentally friendly cement, reducing CO۲ gas, and producing high-strength cement. In this work, the pozzolanic properties of different types of fly ash (Afşin Elbistan C type and Çayırhan F type) are investigated. The fly ashes used in the study are first subjected to the milling process (۱۰, ۲۰, ۳۰, ۴۵, and ۶۰ minutes), and then the ۲۸ and ۹۰-day pozzolanic activity index tests of the milled and unmilled ashes are performed. The results obtained show that the ۲۸-day pozzolanic activity value of the ashes subjected to ۲۰-, ۳۰-, ۴۵-, and ۶۰-minute milling times are higher than the value specified in the standard, compared to the unmilled and ۱۰ min milled fly ash. In addition, for all fly ash samples, the ۹۰-day pozzolanic activity index results show that while the pozzolanic activity index value of Çayırhan (ÇYH) fly ash is higher than the standard value, that of Afşin Elbistan (AE) fly ash is lower than standard. The outcomes of the present study show that the mechanical properties of the fly ash are generated by the burning of coal increase after milling process, and thus can be used as a mineral additive. With the effect of grinding, both fly ash increase the pozzolanic activity. The results are determined with the experimental results obtained.
کلیدواژه ها:
نویسندگان
Demet Demir Sahin
Department of Mining and Mineral Extraction, Mining Technology Program, Gümüşhane Vocational School, Gümüşhane University, Gümüşhane, Turkey
Ibrahim Cavusoglu
Department of Mining Engineering, Faculty of Engineering and Natural Science, Gümüşhane University, Gümüşhane, Turkey
Ali Yilmaz
Mining Engineering Department, Karadeniz Technical University, Trabzon, Turkey
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :