Design Construction and Evaluation of a Ring-like Karbandi Structure
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 98
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ADMTL-16-1_006
تاریخ نمایه سازی: 12 تیر 1402
چکیده مقاله:
Due to the gold price increases in the Iranian market, the desired buyers have been attracted to LGJ (Lightweight Gold Jewelry). Meanwhile, because of the strength decreases in structure in LGJ., we investigated a structural solution in this research. The proposed solution was Karbandi as a supporting lattice-ordered structure in Iranian architecture. We used five types of primary Iranian architecture arches and a perfectly logical Karbandi plan to create ring-like structures. Arches and ring-like structures were compared based on maximum mises stress, strain, and weight using FEM analyses. The applied load and approximate area of it in analyses, according to the female mean Tip-pinch and the mean of minimum, thumb, and index finger width were chosen. Based on analyses results, a ring-like Karbandi structure was chosen for construction. The models were constructed in four alloys category based on sterling silver standard with Cu-nanoparticles as an admixture. A practical test was done to investigate the mean deformation time for each alloy's model category. A weight was used to investigate the observable deformation time-based capacity of the models. Results showed that the lowest mises max stress value was observed in the ۱st arch, although the ۳rd arch had the minimum strain among arches. In ring-like Karbandi structures made from ۱st and ۳rd arches, the minimum value of mises max stress and strain was related to the Karbandi. In the physical load applying process, the category that did not contain cu-nanoparticles had the highest deformation meantime among all categories.
کلیدواژه ها:
نویسندگان
Ahad Shahhoseini
Faculty of Design, Tabriz Islamic Art University, Iran
sajjad pakzad
Faculty of Design, Tabriz Islamic Art University, Iran
Mohammad Mehdi Ranjbar Malek Shahi
Faculty of Design, Tabriz Islamic Art University, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :