مروری بر حضور روکش کاری لیزری در فرایندهای پوشش دهی، بازسازی و نمونه سازی قطعات

مراجع و منابع این مقاله:

• A. A. Siddiqui and A. K. Dubey, "Recent trends in ...
• L. Xue, M. Donovan, Y. Li, J. Chen, S. Wang, ...
• S. Kalawrytinos and H. Desmecht, "Rejuvenating Engines with Rotating Internal ...
• M. Brandt, S. Sun, N. Alam, P. Bendeich, and A. ...
• P. P. Alvisi and V. F. Lins, "An overview of ...
• D. Wang, K.-L. Tsui, and Q. Miao, "Prognostics and health ...
• L. Santo, "Laser cladding of metals: a review," International Journal ...
• A. L. Schawlow and C. H. Townes, "Masers and maser ...
• K. F. Renk, Basics of laser physics. Springer, ۲۰۱۲ ...
• مرندی م، نبوی، س. ف.، فرشیدیان­فر، م. ح. فرشیدیان­فر، جهان­پور، ...
• Y. Ding, R. Liu, L. Wang, J. Li, and J. ...
• H. Zhang, J. Dai, C. Sun, and S. Li, "Microstructure ...
• F. Weng, H. Yu, C. Chen, and J. Dai, "Microstructures ...
• X. Tong et al., "Effects of pre-placed coating thickness on ...
• A. Emamian, M. H. Farshidianfar, and A. Khajepour, "Thermal monitoring ...
• M. H. Farshidianfar, A. Khajepour, and A. P. Gerlich, "Effect ...
• M. Brandt, Laser additive manufacturing: materials, design, technologies, and applications. ...
• R. Bernhard et al., "Laser Cladding – Additive Manufacturing," in Laser ...
• R. Vilar, "Laser cladding," Journal of laser applications, vol. ۱۱, ...
• W.-W. Liu, Z.-J. Tang, X.-Y. Liu, H.-J. Wang, and H.-C. ...
• W. Assiri, A. Asiri, S. Roman-Alerigi, S. Batarseh, and M. ...
• O. Aranke, W. Algenaid, S. Awe, and S. Joshi, "Coatings ...
• N. K. Dey, Additive manufacturing laser deposition of Ti-۶Al-۴V for ...
• M. H. Farshidianfar, "Real-time closed-loop control of microstructure and geometry ...
• L. J. Kumar and C. K. Nair, "Current trends of ...
• فرشیدیان­فر، م. ح.، نبوی، س. ف.، "روکش کاری لیزری در ...
• G. Pastras, A. Fysikopoulos, C. Giannoulis, and G. J. T. ...
• S. Jelvani, R. S. Razavi, M. Barekat, M. R. Dehnavi, ...
• Z. Li et al., "Microhardness and wear resistance of Al۲O۳-TiB۲-TiC ...
• نبوی، س. ف.، فرشیدیان­فر، الف.، و فرشیدیان­فر، م. ح.، "اساس ...
• S. F. Nabavi, M. H. Farshidianfar, A. Farshidianfar, and B. ...
• W. M. Steen and J. Mazumder, Laser material processing. springer ...
• M. N. Fesharaki, R. Shoja-Razavi, H. A. Mansouri, and H. ...
• E. Toyserkani, A. Khajepour, and S. F. Corbin, Laser cladding. ...
• G. Turichin, E. Zemlyakov, E. Y. Pozdeeva, J. Tuominen, and ...
• F. Khodabakhshi, M. Farshidianfar, A. Gerlich, M. Nosko, V. Trembošová, ...
• M. H. Farshidianfar, A. Khajepour, and A. Gerlich, "Real-time control ...
• W. D. Callister Jr and D. G. Rethwisch, Fundamentals of ...
• M. H. Farshidianfar, "Control of microstructure in laser additive manufacturing," ...
• R. B. Hetnarski, Encyclopedia of thermal stresses. Springer Netherlands, ۲۰۱۴ ...
• M. Soodi, "Laser Cladding compared with TIG welding to repair ...
• F. Khodabakhshi, M. Farshidianfar, A. Gerlich, M. Nosko, V. Trembošová, ...
• Y.-C. Kim, M. Hirohata, M. Murakami, and K. Inose, "Effects ...
• W. M. Steen, "Laser surface treatment," in Laser Material Processing: ...
• Y. Huang et al., "Rapid prediction of real-time thermal characteristics, ...
• G. Muvvala, D. P. Karmakar, and A. K. Nath, "Online ...
• J. Powell, P. Henry, and W. Steen, "Laser cladding with ...
• M. H. Farshidianfar, A. Khajepour, S. Khosravani, and A. Gelrich, ...
• M. H. Farshidianfar, A. Khajepouhor, and A. Gerlich, "Real-time monitoring ...
• C. Panwisawas et al., "Keyhole formation and thermal fluid flow-induced ...
• M. H. Farshidianfar, F. Khodabakhshi, A. Khajepour, and A. P. ...
• M. H. Farshidianfar, "Real-time closed-loop control of microstructure and geometry ...
• What is Laser Cladding Technology? Available: https://www.twi-global.com/technical-knowledge/faqs/what-is-laser-cladding[۵۵] W. Cai, J. ...
• L. Zhu et al., "Recent research and development status of ...
• کلاگر، ع. م.، "بررسی ریزساختار و خواص مکانیکی سوپرآلیاژ پایه ...
• A. Singh, A. Ramakrishnan, and G. P. Dinda, "Direct laser ...
• L. Meng, B. Zhu, C. Xian, X. Zeng, Q. Hu, ...
• Available: https://tmcomas.com/en/service/laser-cladding/[۶۱] W. Grzesik, "Hybrid additive and subtractive manufacturing processes ...
• J. R. Lawrence, Advances in laser materials processing: technology, research ...
• M. Meboldt and C. Klahn, Industrializing additive manufacturing-proceedings of additive ...
• B. Graf, A. Gumenyuk, and M. Rethmeier, "Laser metal deposition ...
• M. Farshidianfar, F. Khodabakhshi, A. Khajepour, and A. Gerlich, "Closed-loop ...
• J. Liu, H. Liu, X. Tian, H. Yang, and J. ...
• Y. Zou, B. Ma, H. Cui, F. Lu, and P. ...
• D. S. Rickerby and A. Matthews, Advanced surface coatings: a ...
• A. Rashid, "Overview of disc brakes and related phenomena-a review," ...
• M. Shin, K. Cho, S. Kim, and H. Jang, "Friction ...
• T. Schopphoven, J. H. Schleifenbaum, S. Tharmakulasingam, and O. Schulte, ...
• M. H. Farshidianfar, A. Khajepour, M. Zeinali, and A. Gelrich, ...
• F. ILT. (۲۰۱۴, ۹/۱۹/۲۰۲۰). Coating through High-speed Laser Material Deposition. ...
• K. Sertoglu. (۲۰۲۰, ۲/۱۳/۲۰۲۱). BILSING AUTOMATION ADOPTS FRAUNHOFER ILT’S DED ...
• M. Barbosa, R. Bischoff, W. Strauß, H. Hillig, S. Nowotny, ...
• B. W. Lagow, "Materials Selection in gas turbine engine design ...
• J. D. Majumdar and I. Manna, "Laser processing of materials," ...
• M. D. Lijue Xue, Yangsheng Li, Jianyin Chen, Shaodong Wang, ...
• M. Touri, F. Kabirian, M. Saadati, S. Ramakrishna, and M. ...
• J. Edgar and S. Tint, "Additive manufacturing technologies: ۳D printing, ...
• R. Liu, Z. Wang, T. Sparks, F. Liou, and J. ...
• C. Hauser. Case Study: Laser Powder Metal Deposition Manufacturing of ...
• J. Ion, Laser processing of engineering materials: principles, procedure and ...
• P. Cavaliere, Laser Cladding of Metals. Springer, ۲۰۲۱ ...
• F. A. España, V. K. Balla, S. Bose, and A. ...
• S. Yang and T. A. Phung, "Microstructure and properties of ...
• L. R. Migliore, Laser Materials Processing. CRC Press, ۱۹۹۶ ...
• N. Kampanis and I. Hauer, "PROPELLER SHAFT REPAIR FOR A ...
• X. Lei, C. Huajun, L. Hailong, and Z. Yubo, "Study ...
• S. Kaierle et al., "Single-crystal turbine blade tip repair by ...
• Y. Ding, R. Liu, J. Yao, Q. Zhang, and L. ...
• A. Pascu, J. M. Rosca, and E. M. Stanciu, "Laser ...
• Y. Zhu, Y. Yang, X. Mu, W. Wang, Z. Yao, ...
• D. Hu, Y. Liu, H. Chen, and M. Wang, "Microstructure ...
• D. Hu, Y. Liu, H. Chen, M. Wang, and J. ...
• L. Xue, A. Theriault, M.-U. Islam, M. Jones, and H.-P. ...
• M. Marya, V. Singh, S. Marya, and J. Y. Hascoet, ...
نمایش کامل مراجع