Analytical Solutions of First-order Displacement Discontinuity Elements in Poroelasticity
محل انتشار: مجله معدن و محیط زیست، دوره: 14، شماره: 2
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 59
فایل این مقاله در 18 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JMAE-14-2_014
تاریخ نمایه سازی: 27 تیر 1402
چکیده مقاله:
The presence of pores and cracks in porous and fractured rocks is mostly accompanied by fluid flow. Poroelasticity can be used for the accurate modeling of many rock structures in the petroleum industry. The approach of the stress to the value of the fracture stress and the effect of pore pressure on the deformation of rock are among the effects of fluid on the mechanical behavior of the medium. Due to the deformation-diffusion property of porous media, governing equations, strain-displacement, and stress-strain relationships can be changed to each other. In this study, constitutive equations and relationships necessary to investigate the behavior and reaction of rock in a porous environment are stated. Independent and time-dependent differential equations for an impulse and point fluid source are used to obtain the fundamental solutions. Influence functions are obtained by using the shape functions in the formulation of the fundamental solutions and integrating them. To check the validity and correctness of provided formulation, several examples are mentioned. In the first two examples, numerical application and analytical solution are used at different times and in undrained and drained conditions. In times ۰ (undrained response of medium) and ۴۵۰۰ seconds (drained response of medium), there is good coordination and agreement between the numerical and analytical results. In the third example, using the numerical application, a crack propagation path in the wellbore wall is obtained, which is naturally in the direction of maximum horizontal stress.
کلیدواژه ها:
نویسندگان
Mohammadhossein Dehghani Firoozabadi
Department of Mining and Metallurgical Engineering, Faculty of Engineering, Yazd University, Yazd, Iran
Mohammad Fatehi Marji
Department of Mining and Metallurgical Engineering, Faculty of Engineering, Yazd University, Yazd, Iran
Abolfazl Abdollahipour
School of Mining Engineering, College of Engineering, University of Tehran, Tehran, Iran
Alireza Yarahamdi Bafghi
Department of Mining and Metallurgical Engineering, Faculty of Engineering, Yazd University, Yazd, Iran
Yousef Mirzaeian
Department of Mining and Metallurgical Engineering, Faculty of Engineering, Yazd University, Yazd, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :