GROWTH AND COLLAPSE OF A CAVITATION BUBBLE INSIDE A RIGID CYLINDER: EFFECT OF MEMBRANE TENSION
محل انتشار: مجله علوم و مهندسی هوافضا، دوره: 13، شماره: 1
سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 84
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JASTI-13-1_008
تاریخ نمایه سازی: 8 مرداد 1402
چکیده مقاله:
In this paper, growth and collapse of a cavitation bubble inside a rigid cylinder with a compliant coating (a model of human’s vessels) are studied using Boundary Integral Equation and Finite Difference Methods. The fluid flow is treated as a potential flow and Boundary Integral Equation Method is used to solve Laplace’s equation for velocity potential. The compliant coating is modeled as a membrane with a spring foundation. At the interface between the fluid and the membrane, the pressure and normal velocity in the flow are matched to the pressure and normal velocity of the membrane using linearized condition. The effects of the parameters describing the flow (the fluid density, the initial cavity size and its position) and the parameter describing the compliant coating (membrane tension) on the interaction between the fluid and the cylindrical compliant coating are shown throughout the numerical results. It is shown that the bubble life time slightly decreases by increasing membrane tension.
کلیدواژه ها:
نویسندگان
Amireh Norbaskhsh
Department of Mechanical Engineering, Bu-Ali Sina University, Hamedan
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :