USE OF TITANIUM AND TUNGSTEN AS AN ALTERNATIVE TO GOLD IN JEWELLERY MANUFACTURING
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 14، شماره: 3
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 70
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-14-3_002
تاریخ نمایه سازی: 26 مرداد 1402
چکیده مقاله:
In this study the use titanium and tungsten as alternatives to the noble metals in the jewellery industry was investigated. The degradation of titanium and tungsten were compared to that of gold, used as reference. Alternate immersion tests were performed in ۳.۵% sodium chloride and artificial perspiration. The metals’ abrasion resistance with respect to textile fabrics was determined.
In general, there is around ۳۰% difference in pit density for titanium and tungsten as compared to that of gold. Pit depth and pit diameter showed a similar trend. From the abrasive test performed, it was observed that titanium and tungsten had insignificant changes in the surface reflectivity with time. Hence, it was deduced that titanium and tungsten products would have longer maintenance intervals than that of gold. New tools and techniques, however, would be required by jewellers to work with titanium and tungsten.
کلیدواژه ها:
gold ، titanium ، tungsten ، corrosion ، accelerated tests ، pitting ، abrasion ، abrasive test ، reflectivity ، jewellery
نویسندگان
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :