THE EFFECT OF SEVERE PLASTIC DEFORMATION ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF AS-CAST AZ۳۱

سال انتشار: 1395
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 79

فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJMSEI-13-3_004

تاریخ نمایه سازی: 26 مرداد 1402

چکیده مقاله:

The evolution of microstructure and mechanical properties of a magnesium cast alloy (AZ۳۱) processed by equal channel angular pressing (ECAP) at two different temperatures were investigated. The as-cast alloy with an average grain size of ۳۶۰  was significantly refined to about ۵  after four ECAP passes at ۵۴۳ K. Grain refinement was achieved through dynamic recrystallization (DRX) during the ECAP process in which the formation of necklace-type structure and bulging of original grain boundaries would be the main mechanisms. ECAP processing at lower temperature resulted in finer recrystallized grains and also a more homogenous microstructure. The mechanical behavior was investigated at room temperature by tensile tests. The obtained results showed that the ECAP processing can basically improve both strength and ductility of the cast alloy. However, the lower working temperature led to higher yield and ultimate strength of the alloy.

کلیدواژه ها:

Equal channel angular pressing ، AZ۳۱ ، Magnesium alloy ، Dynamic Recrystallization

نویسندگان

S. Khani

School of Materials and Metallurgical Engineering, Iran University of Science and Technology

M. T. Salehi

School of Materials and Metallurgical Engineering, Iran University of Science and Technology

H. R. Samim

School of Materials and Metallurgical Engineering, Iran University of Science and Technology

M. R. Aboutalebi

Center of Excellence for Advanced Materials and Processing (CEAMP), School of Materials and Metallurgical Engineering, Iran University of Science and Technology

H. Palkowski

Institute of Metallurgy, Clausthal University of Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Magnesium Technology: Metallurgy, Design Data, Applications, Berlin, Heidelberg, Springer Berlin ...
  • Pekguleryuz, M., O., Kainer, K., U., Kaya A., K., and ...
  • Valiev R., Z., Langdon T., G., Principles of equal-channel angular ...
  • Langdon T., G., The principles of grain refinement in equal-channel ...
  • Langdon T., G., Twenty-five years of ultrafine-grained materials: Achieving exceptional ...
  • Yamashita A., Horita Z., Langdon T.,G., Improving the mechanical properties ...
  • Figueiredo R., B., Langdon T., G., Principles of grain refinement ...
  • Figueiredo R., B., Cetlin P.,R., Langdon T., G., The processing ...
  • Cetlin P., R., Aguilar M., T., P., Figueiredo RB, Langdon ...
  • Kang F., Wang J., T., Peng Y., Deformation and fracture ...
  • Xu C., Xia K., Langdon T., G., Processing of a ...
  • Xia K., Wang J., T., Wu X., Chen G., Gurvan ...
  • Li J., Xu W., Wu X., Ding H., Xia K., ...
  • Gu C., F., Tóth L., S., Field D., P., Fundenberger ...
  • Figueiredo R., B., Langdon T., G., Principles of grain refinement ...
  • Figueiredo R., B., Langdon T., G., Grain refinement and mechanical ...
  • Poggiali F., S., J., Silva C., L., P., Pereira P., ...
  • Matsubara K., Miyahara Y., Horita Z., Langdon T., G., Developing ...
  • Horita Z., Matsubara K., Makii K., Langdon T., G., A ...
  • Furui M., Kitamura H., Anada H., Langdon T., G., Influence ...
  • Humphreys F., J., Hatherly M., Recrystallization and Related Annealing Phenomena, ...
  • Galiyev A., Kaibyshev R., Gottstein G., Correlation of plastic deformation ...
  • Kim H., K., Kim W., J., Microstructural instability and strength ...
  • Masoudpanah S., M., Mahmudi R., The microstructure, tensile, and shear ...
  • نمایش کامل مراجع