FLOW BEHAVIOR OF MOLTEN METAL IN ALUMINUM LFC PROCESS
محل انتشار: مجله علم مواد و مهندسی ایران، دوره: 1، شماره: 2
سال انتشار: 1383
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 26
نسخه کامل این مقاله ارائه نشده است و در دسترس نمی باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJMSEI-1-2_004
تاریخ نمایه سازی: 26 مرداد 1402
چکیده مقاله:
The effects of gating system and pattern geometry on the metal flow in the lost foam casting (LFC) process have been investigated using glass covered mold and video recording system. Unlike convectional casting process, the type of the gating system showed little effect on fillability in lost foam, but pattern thickness had large effect on mold filling. The mold filling behavior seems to be controlled by the combined influences of heat and mass transfer. The flow rate increased with increasing pattern thickness.
کلیدواژه ها:
نویسندگان