A Semi-analytical Approach to Elastic-plastic Stress Analysis of FGM Pressure Vessels

سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 62

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JSMA-5-1_006

تاریخ نمایه سازی: 28 مرداد 1402

چکیده مقاله:

An analytical method for predicting elastic–plastic stress distribution in a cylindrical pressure vessel has been presented. The vessel material was a ceramic/metal functionally graded material, i.e. a particle–reinforcement composite. It was assumed that the material’s plastic deformation follows an isotropic strain-hardening rule based on the von-Mises yield criterion, and that the vessel was under plane-stress conditions. The mechanical properties of the graded layer were modelled by the modified rule of mixtures. By assuming small strains, Hencky’s stress–strain relation was used to obtain the governing differential equations for the plastic region. A numerical method for solving those differential equations was then proposed that enabled the prediction of stress state within the structure. Selected finite element results were also presented to establish supporting evidence for the validation of the proposed analytical modelling approach. Similar analyses were performed and solutions for spherical pressure made of FGMs were also provided.

کلیدواژه ها:

نویسندگان

A.T Kalali

Mechanical Engineering Department, Ferdowsi University of Mashhad

S Hadidi-Moud

Mechanical Engineering Department, Ferdowsi University of Mashhad

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Chakraborty A., Gopalakrishnan S., Reddy J.N., ۲۰۰۳, A new beam ...
  • Jin ZH., Paulino GH., Dodds Jr RH., ۲۰۰۳, Cohesive fracture ...
  • Figueiredo F., Borges L., Rochinha F., ۲۰۰۸, Elasto-plastic stress analysis ...
  • Haghpanah Jahromi B., Farrahi GH., Maleki M., Nayeb-Hashemi H., Vaziri ...
  • Haghpanah Jahromi B., Ajdari A., Nayeb-Hashemi H., Vaziri A., ۲۰۱۰, ...
  • Jahed H., Dubey RN., ۱۹۹۷, An axisymmetric method of elastic-plastic ...
  • Jahed H., Farshi B., Bidabadi J., ۲۰۰۵, Minimum weight design ...
  • Jahed H., Shirazi R., ۲۰۰۱, Loading and unloading behaviour of ...
  • You LH., Zhang JJ., You XY., ۲۰۰۵, Elastic analysis of ...
  • Dai HL., Fu YM., Dong ZM., ۲۰۰۶, Exact solutions for ...
  • Chen YZ., Lin XY., ۲۰۰۸, Elastic analysis for thick cylinders ...
  • Sadeghian M., Ekhteraei H., ۲۰۱۱, Axisymmetric yielding of functionally graded ...
  • Dunne F., Petrinic N., ۲۰۰۶, Introduction to Computational Plasticity, Oxford ...
  • Chakrabarty J., ۲۰۰۶, Theory of Plasticity, UK, Elsevier Butterworth Heinemann, ...
  • Mendelson A., ۱۹۶۸, Plasticity: Theory and Application, New York, Macmillan ...
  • Suresh S., Mortensen A., ۱۹۹۸, Fundamentals of Functionally Graded Materials, ...
  • Carpenter RD., Liang WW., Paulino GH., Gibeling JC., Munir ZA., ...
  • Jamshidi N., Abouei A., Molaei R., Rezaei R., Jamshidi M., ...
  • Karlsson., Hibbitt., Sorensen., ۲۰۰۸, ABAQUS/CAE, Version ۶.۸-۱ ...
  • Setoodeh A., Kalali A., Hosseini A., ۲۰۰۸, Numerical analysis of ...
  • نمایش کامل مراجع