Displacements and Stresses in Pressurized Thick FGM Cylinders with Varying Properties of Power Function Based on HSDT

سال انتشار: 1391
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 71

فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JSMA-4-3_002

تاریخ نمایه سازی: 28 مرداد 1402

چکیده مقاله:

Using the infinitesimal theory of elasticity and analytical formulation, displacements and stresses based on the high-order shear deformation theory (HSDT) is presented for axisymmetric thick-walled cylinders made of functionally graded materials under internal and/or external uniform pressure. The material is assumed to be isotropic heterogeneous with constant Poisson’s ratio and radially varying elastic modulus continuously along the thickness with a power function. At first, general governing equations of the FGM thick cylinders are derived by assumptions of the high-order shear deformation theory. Following that, the set of non-homogenous linear differential equations with constant coefficients, for the cylinder under the generalized clamped-clamped conditions have been solved analytically and the effect of loading and inhomogeneity on the stresses and displacements have been investigated. The results are compared with the findings of both first-order shear deformation theory (FSDT) and finite element method (FEM). Finally, the effects of higher order approximations on the stresses and displacements have been studied.

کلیدواژه ها:

نویسندگان

M Ghannad

Department of Mechanical Engineering, Shahrood University of Technology

H Gharooni

Department of Mechanical Engineering, Shahrood University of Technology

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Mirsky I., Hermann G., ۱۹۵۸, Axially motions of thick cylindrical ...
  • Reddy J.N., Liu C.F., ۱۹۸۵, A higher-order shear deformation theory ...
  • Greenspon J.E., ۱۹۶۰, Vibration of a thick-walled cylindrical shell, comparison ...
  • Fukui Y., Yamanaka N., ۱۹۹۲, Elastic analysis for thick-walled tubes ...
  • Simkins T.E., ۱۹۹۴, Amplifications of flexural waves in gun tubes, ...
  • Eipakchi H.R., Rahimi G.H., Khadem S.E., ۲۰۰۳, Closed form solution ...
  • Eipakchi H.R., Khadem S.E., Rahimi G.H., ۲۰۰۸, Axisymmetric stress analysis ...
  • Hongjun X., Zhifei S., Taotao Z., ۲۰۰۶ , Elastic analyses ...
  • Zhifei S., Taotao Z., Hongjun X., ۲۰۰۷, Exact solutions of ...
  • Tutuncu N., ۲۰۰۷, Stresses in thick-walled FGM cylinders with exponentially-varying ...
  • Ghannad M., Rahimi G.H., Khadem S.E., ۲۰۱۰, General plane elasticity ...
  • Ghannad M., Rahimi G.H., Khadem S.E., ۲۰۱۰, General shear deformation ...
  • Zamaninejad M., Rahimi G.H., Ghannad M., ۲۰۰۹, Set of field ...
  • Ghannad M., Zamani Nejad M., Rahimi G.H., ۲۰۰۹, Elastic solution ...
  • Ghannad M., Zamani Nejad M., ۲۰۱۰, Elastic analysis of pressurized ...
  • Eipakchi H.R., ۲۰۱۰, Third-order shear deformation theory for stress analysis ...
  • Ghannad M., Rahimi G.H., Zamani Nejad M., ۲۰۱۲, Determination of ...
  • نمایش کامل مراجع