Optimization of Hot Workability in Ti-IF Steel by Using the Processing Map

سال انتشار: 1383
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 68

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ISSIRAN-1-1_001

تاریخ نمایه سازی: 5 شهریور 1402

چکیده مقاله:

Processing map for hot working of Ti-IF steel has been developed in the temperature range of ۷۵۰ to ۱۱۰۰ °C and strain rate of ۰.۰۱ to ۱۰۰ s-۱. This map in the austenite region exhibits a single domain with a peak efficiency of ۴۵% occurring at ۱۰۲۵ °C and strain rate of ۰.۰۲ s-۱. The domain extends over the temperature range of ۱۰۰۰ to ۱۱۰۰ °C and strain rate range of ۰.۰۱ to ۱ s-۱. The true stress-strain curves and microstructural observations shows the occurrence of dynamic recrystallization in this domain. In two phase regions, where austenite and ferrite are present together, flow localization occurs in the form of bands with a fine grained structure as a result of dynamic recrystallization in the bands. These deformation bands are formed at ۴۵° with respect to axial direction of compression. The processing map in ferrite region exhibits a domain with a peak efficiency of ۳۸% occurring at ۸۲۵ °C and strain rate of ۰.۰۲ s-۱, so this domain extends over the temperature range of ۸۰۰ to ۸۵۰ °C and strain rate range of ۰.۰۱ to ۰.۵ s-۱. The true stress-strain curves and microstructural results confirm the occurrence of partially dynamic recrystallization in this domain.

نویسندگان

R Ebrahimi

Dept.of Materials Science and Engineering Shiraz University, Shiraz, IRAN

A Najafizadeh

Dept.of Materials Science and Engineering Shiraz University, Shiraz, IRAN

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • H. Takechi, IF Steels ۲۰۰۰ Proceedings,[۲] T. Senuma, ISIJ Int., ...
  • A. Najafizadeh, J. J. Jonas, and S. Yue, Met ...
  • Trans. ۲۳A(۱۹۹۲), ۲۶۰۷ ...
  • M. R. Barnett and J. J. Jonas, ISIJ Int., ۳۹(۱۹۹۹),[۵] ...
  • C. J. Barrett and B. Wilshire, J. Mater. ProcessingTech., ۱۲۲(۲۰۰۲), ...
  • Y. V. R. K. Prasad, H. L. Gegel, S. M. ...
  • Barker, Metall. Trans. A, ۱۵(۱۹۸۴), ۱۸۸۳ ...
  • H. L. Gegel, J. C. Malas, S. M. Doraivelu, and ...
  • A. Shende,: Metals Handbook Vol.۱۴ , ASM, MetalsPark, Ohio, (۱۹۸۷), ...
  • Y. V. R. K. Prasad and T. Seshacharyulu, Int ...
  • Mater. Rev.,۴۳(۱۹۹۸), ۲۴۳ ...
  • H. Ziegler :Progress in Solid Mechanics, Vol.۴,Wiley, New York, (۱۹۶۳), ...
  • A. K. S. Kalyan Kumar, “Criteria for PredictingMetallurgical Instabilities in ...
  • S. V. S. Narayana Murty and B. Nageswara Rao,Mater. Sci. ...
  • J. K. Chakravaritty, Y. V. R. K. Prasad, and M ...
  • K. Asundi, Metall. Trans. A۲۲ (۱۹۹۱), ۸۲۹ ...
  • O. Sivakesavam, I. S. Rao, and Y. V. R. K ...
  • Prasad, Mater. Sci. Tech.,۹(۱۹۹۳), ۸۰۵ ...
  • B. V. Radhakrishna Bhat, Y. R. Mahajan, and Y ...
  • V. R. K. Prasad, Metall. Mater. Trans., ۳۱ A(۲۰۰۰),[۱۸] P. ...
  • Mannan, Y. V. R. K. Prasad, and R. C. Chaturvedi, ...
  • Mater. Processing Tech., ۱۳۲(۲۰۰۳), ۲۶۲ ...
  • G. Krauss, Deformation of Materials, ASM,Metals Park, Ohio, (۱۹۸۵), ۱۱۳ ...
  • . S. V. S. Narayana Murty, B. Nageswara Rao,and B. ...
  • D. N. Hanlon, J. Sietsma, and S. van der Zwaag,ISIJ ...
  • نمایش کامل مراجع