The effects of chemical composition variations on microstructure and mechanical properties of nanostructured, low temperature bainitic steels

سال انتشار: 1389
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 60

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ISSIRAN-7-2_002

تاریخ نمایه سازی: 6 آبان 1402

چکیده مقاله:

Bainitic transformation at low transformation temperatures leads to a microstructure involving fine plates of bainitic ferrite and thin films of retained austenite. This microstructure has shown ultimate tensile strength of about ۲.۲ GPa, noticeable uniform elongation in the range of ۵ to ۳۰%, hardness values of about ۶۰۰ to ۶۷۰ HV and impact toughness in the range of ۳۰ to ۴۰ MPa m۱/۲. With careful design of the chemical composition of steel, suitable mechanical properties with lower cost production could be achieved. In the current work, the microstructure and mechanical properties of two steels with different chemical compositions have been evaluated using XRD, SEM, TEM, tensile and Charpy impact tests. The results of this study suggest that without trial and error, it is possible to design a new steel with unique microstructure and mechanical properties. The achieved mechanical properties are due to the microstructural characteristics which evolved during isothermal transformation.

نویسندگان

M. Yoozbashi

Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran

S. Yazdani

Faculty of Materials Engineering, Sahand University of Technology, Tabriz, Iran

T. Wang

State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao ۰۶۶۰۰۴, China

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. jones and P. ...
  • F.G. Caballero, H.K.D.H. Bhadeshia, K.J.A. Mawella, D.G. Jones and P. ...
  • F.G. Caballero and H.K.D.H. Bhadeshia: Curr. Opin. Solid State Mater. ...
  • C. Garcia-Mateo, F.G. Caballero and H.K.D.H. Bhadeshia: ISIJ Int., ۴۳(۲۰۰۳), ...
  • C. Garcia-Mateo, F.G. Caballero and H.K.D.H. Bhadeshia: Mater. Sci. Technol., ...
  • H.K.D.H. Bhadeshia: Proc. of the Solid–Solid Phase Transformations in Inorganic ...
  • H.K.D.H. Bhadeshia: Mater. Sci. Forum, ۵۰۰–۵۰۱ (۲۰۰۵), ۶۳ ...
  • C. Garcia-Mateo, F.G. Caballero and H.K.D.H. Bhadeshia: ISIJ Int., ۴۳(۲۰۰۳), ...
  • H.K.D.H. Bhadeshia: Materials Algorithms Project, http://www.msm.cam.ac.uk/map/steel/programs/mucg۸۳.html ...
  • M.N. Yoozbashi and S. Yazdani, Mater. Sci. Eng. A, ۵۲۷(۲۰۱۰), ...
  • F.G. Caballero, M.K. Miller, S.S. Babu and C. Garcia-Mateo: Acta ...
  • . B. C. De Cooman: Curr. Opin. Solid State Mater. ...
  • S.B. Singh and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, ۲۴۵(۱۹۹۸), ...
  • C.H. Young and H.K.D.H. Bhadeshia: Mater. Sci. Technol., ۱۰(۱۹۹۴), ۲۰۹ ...
  • نمایش کامل مراجع