Cladding of stellite composite on carbon steel by gas tungsten arc welding (GTAW)
سال انتشار: 1388
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 43
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ISSIRAN-6-2_007
تاریخ نمایه سازی: 6 آبان 1402
چکیده مقاله:
This paper deals with the investigation of the microstructure and hardness of steel samples cladded with satellite ۶-WC composites by using gas tungsten arc welding (GTAW) process. For this purpose, steel samples were coated with unreinforced and reinforced stellite (by ۲۰, ۳۰ and ۴۰ wt.% WC). The cladded samples were evaluated by metallographic studies, microhardness measurement and X-ray diffraction analysis. In order to reduce dilution and to increase the hardness, samples were coated by two layers of similar chemical composition. The results indicated that in samples cladded by reinforced stellite, with an increase in tungsten carbide content, the amount of hypoeutectic phase (γ + (γ + WC)) increased. This is accompanied by an increase in hardness.
کلیدواژه ها:
نویسندگان
F. Madadi
Department of Materials Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶۸۳۱۱, Iran
M. Shamanian
Department of Materials Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶۸۳۱۱, Iran
F. Ashrafizadeh
Department of Materials Engineering, Isfahan University of Technology, Isfahan, ۸۴۱۵۶۸۳۱۱, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :