Investigation of Magnitude and Position of Maximum von Mises Stress in The Cylindrical Contact Problems

سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 59

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_ADMTL-16-3_005

تاریخ نمایه سازی: 8 آبان 1402

چکیده مقاله:

In the analysis of contact mechanics problems, determination of stress field in mechanical elements is essential. Between the stress components the von Mises stress is more important, because it is used in the investigation of yield criteria and fatigue fracture of elements. The aim of this study is to present formulas for determining the magnitude and position of maximum von Mises stress. For this purpose, the effect of various material properties, element geometries and loading conditions on these two parameters are investigated. By applying Hertzian contact stress and von Mises relations, the magnitude and position of maximum von Mises stress are determined. The von Mises stress is assumed to be a function of material properties, geometry of the element and loading conditions and finally two formulas are presented for the calculation of the magnitude and position of maximum von Mises stress. The results of these presented formulas are in close agreement with the literature. The error is less than ۱% for depth prediction and less than ۶% for stress value prediction, which confirms the accuracy of the presented formulas.

کلیدواژه ها:

Contact mechanics ، Depth prediction ، Hertzian stresses ، Maximum von Mises stress

نویسندگان

Hasan Heirani

Department of Mechanical Engineering, Faculty of Engineering, Bozorgmehr University of Qaenat, Qaen, Iran.

Reza Naseri

Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Boresi, A. P., Schmidt, R. J., and Sidebottom, O. M., ...
  • Beer, F. P., Johnston, E. R., DeWolf, J. T., and ...
  • Heirani, H., Farhangdoost, K., Effect of Friction Coefficient and Maximum ...
  • Johnson, K. L., Contact Mechanics, Cambridge University Press, Cambridge, UK, ...
  • Glodez, S., Winter, H., and Stuwe, H. P., A Fracture ...
  • Glodez, S., Ren, Z., Modelling of Crack Growth Under Cyclic ...
  • Glodez, S., Ren, Z., and Flasker, J., Simulation of Surface ...
  • Glodez, S., Abersek, B., Flasker, J., and Ren, Z., Evaluation ...
  • Aslantas, K., Tasgetiren, S., A Study of Spur Gear Pitting ...
  • Fajdiga, G., Glodez, S., and Kramar, J., Pitting Formation Due ...
  • Francois, H., Gilbert, H., Damien, H., Mikael, G., and Thomas, ...
  • Wei, P., Zhou, H., Liu, H., Zhu, C., Wang, and ...
  • Liu, H., Wang, W., Zhu, C., Jiang, C., Wu, W., ...
  • He, H., Liu, H., Zhu, C., and Tang, J., Study ...
  • Li, W., Deng, S., and Liu, B., Experimental Study on ...
  • Guan, J., Wang, L., Zhang, C., and Ma, X., Effects ...
  • Heirani, H., Farhangdoost, K., Predicting Depth and Path of Subsurface ...
  • Sun, P., An, Z., and Jiang, W., Analysis of Non-Hertz ...
  • Kohn, A. O., Silva, F. A., A Numerical and Analytical ...
  • Budynas, R., Nisbett, K., Shigley's Mechanical Engineering Design, ۱۰th ed, ...
  • Qin, W. J., Guan, C. Y., An Investigation of Contact ...
  • نمایش کامل مراجع