Oil Immersed Distribution Transformer HST Reduction using Vegetable Oils and ONAN Cooling
سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 66
فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-10-1_002
تاریخ نمایه سازی: 15 آبان 1402
چکیده مقاله:
Today, the use of electricity sources is increasing as cities are growing. With the increasing use of mineral oils for transformers cooling in the distribution network, due to the problems encountered using these oils, an alternative fluid should be used inside the transformers instead of mineral oils. Therefore, mineral oils should be replaced with fluids that are more compatible with nature due to the environmental hazards and high costs. Hence, vegetable oils can be used as suitable alternatives for the mineral oils in transformers due to their low risk and the renewability. On the other hand, compared to the mineral oils that have a fire point of about ۱۵۱ Celsius degrees, vegetable oils have fire points higher than ۳۱۱ Celsius degrees. As a result, from this viewpoint, they are considered as harmless fluids. Vegetable oils are simply degraded in the nature, and due to their different chemical structures compared to the mineral oils, they can increase the life of the equipment. Besides, the most important point is that they improve the transformer cooling performance, in terms of thermal analysis. Thus, in this paper, the distribution transformer electromagnetic-thermal analysis and conjugate heat transfer, in presence of different types of vegetable oils, and different types of cores such as grain-oriented silicon steel, amorphous and vitroperm alloy are investigated. Afterwards, the obtained results, especially hot spot temperature, are compared with distribution transformer containing mineral oil. ANSYS software has also been used for simulations.
کلیدواژه ها:
Transformer ، Oil natural air natural (ONAN) cooling ، vegetable oil ، Vitroperm alloy ، Hot spot temperature (HST)
نویسندگان
Mohammad Ali Taghikhani
Department of Engineering, Imam Khomeini International University, Qazvin, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :