Investigation of Antifouling Paints for Vessel in Tropical Seawater of North Jakarta in Indonesia

سال انتشار: 1403
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 60

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJE-37-1_015

تاریخ نمایه سازی: 15 آذر 1402

چکیده مقاله:

The copper-based biocide is mostly used as primary additive of Antifouling (AF) paint in Indonesia especially on vessels. The evaluation for the efficacy of AF paint was conducted where anti corrosion (AC) paint was also as a reference. The panels with both paints were exposed to various sea depths of up to ۳ meters until ۱۲ months of exposures. The measurement of parameters of seawater consisting of water conductivity, pH, temperature, dissolved oxygen and salinity were carried out. There was no or less attached marine biofouling on AF-painted panels but not on AC-painted panels up to ۱۲-months of field exposure in various sea depths. There was no difference between the properties of AF paints before and after exposure to various sea depths. The inhibitive performance of AF paint depends on the existence of AF layer containing Cu۲O biocide where the thickness of that layer decreases in increase of time exposure.

نویسندگان

G. Priyotomo

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

S. Prifiharni

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

A. Nikitasari

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

S. Musabikha

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

R. Kusumastuti

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

L. Nuraini

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

J. Triwardono

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

H. Nugraha

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

A. Budi Prasetyo

Research Center for Metallurgy, National Research and Innovation Agency, Bld.۷۲۰, Serpong, Tangerang Selatan, Banten, Indonesia

H. Julistiono

Research Center for Applied Microbiology, National Research and Innovation Agency, Jakarta-Bogor No.KM ۴۶, Pakansari, Cibinong, Bogor, Jawa Barat, Indonesia

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Priyotomo G, Nuraini L, Prifiharni S. A short review of ...
  • Schwindt E, Gappa JL, Raffo MP, Tatián M, Bortolus A, ...
  • Carteau D, Vallée-Réhel K, Linossier I, Quiniou F, Davy R, ...
  • Priyotomo G, Nuraini L, Gunawan H, Triwardono J, Sundjono S, ...
  • Leidonald R, Muhtadi A, Lesmana I, Harahap Z, Rahmadya A, ...
  • Jaud T, Dragon A-C, Garcia JV, Guinet C. Relationship between ...
  • نمایش کامل مراجع