Investigating the density of Polyurethane foam on crashworthiness and energy absorption parameters in foam filled tubes under axial quasi-static loading
محل انتشار: مجله علم مهندسی خودرو، دوره: 13، شماره: 2
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 39
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJAEIU-13-2_004
تاریخ نمایه سازی: 4 دی 1402
چکیده مقاله:
Thin-walled tubes can avoid the transition of injurious acceleration and excessive forces to the protected section and minimize the damage severity. They absorb energy under axial loading circumstances as crashworthiness structures. The present study deals with the investigation of the density effects of foam on the quasi-static loading response of foam filled and empty cylindrical tubes. To investigate energy absorption parameters by varying in foam density, two different densities of polyurethane foam were used to evaluate the efficacy of polyurethane foam density under axial quasi-static loading. According to the results, the use of foam as a filler also influences the tubes’ deformation behavior in addition to the effects of thickness. It was revealed that by incrementing the thickness to ۲۰%, the peak load increased by ۲۵.۲%. Two densities of foam were considered as ۴۰ and ۸۵kg/m۳ to assess the effect of density of polyurethane foam as filler on the energy absorption behavior of tubes under axial loading. Result showed that when foam density increased by about two times, the peak load increased by ۱%. According to the results, filling tube by foam also influences the tubes deformation behavior in addition to the effects of thickness
کلیدواژه ها:
نویسندگان
Farid Raoof
Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran
Javad Rezapour
Department of Mechanical Engineering, Lahijan Branch, Islamic Azad University, Lahijan, Iran
Sina Gohari Rad
Department of Mechanical Engineering, Rasht Branch, Islamic Azad University, Rasht, Iran
Reza Rajabiehfard
Department of Mechanical Engineering, Rasht Branch, Islamic Azad University, Rasht, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :