Verifying Cement Compressive Strength Test Result Using the Most Effective Parameters

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 53

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JIRAEG-11-3_006

تاریخ نمایه سازی: 5 دی 1402

چکیده مقاله:

This study was conducted to analyze factors influencing the compressive strength test. The purpose was to introduce various factors affecting the accuracy of the compressive strength test in accordance with current standards and evaluate the effect of some effective parameters such as equipment, mortar preparation, sample preparation, loading rate and etc. To check the Reproducibility of the compressive strength test a program was developed to assess the possible modes through changes in loading rate matrix, standard sand, sample preparation, and tester. The changes of each parameter were measured within ۲, ۷ and ۲۸-day interval, while other conditions were considered as constant based on the EN۱۹۶-۱ and ISIRI ۳۹۳ standards. According to the test results, the most important factors in creating the difference in results are the type of the sand and loading rate. The changes in the Reproducibility percentage using different sands with softer grains increases the coefficient of variation and reduced performance of the test. Also in some cases, with increasing the loading rate up to ۴۰%, the compressive strength of ۲۸ days is increased by ۱۳%.

نویسندگان

محمد بهاریه

گروه مهندسی شیمی، دانشکده مهندسی، دانشگاه فردوسی مشهد، مشهد، ایران

معصومه خلیلی

گروه زمین شناسی، دانشکده علوم، دانشگاه فردوسی مشهد، مشهد، ایران

بهنام نصراله زاده

گروه مهندسی شیمی، دانشکده مهندسی، دانشگاه فردوسی مشهد، مشهد، ایران

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Aggoun, S., Cheikh, Z.M., Chikh, N., ۲۰۰۸. Effect of some ...
  • Bekaeian, M., ۱۹۹۷. Iran's national standard, mechanical testing methods of ...
  • Caldarone, M. A., ۲۰۰۸. High-Strength Concrete: A Practical Guide, Routledge, ...
  • Del Viso, J. R., Carmona, J. R., Ruiz, G., ۲۰۰۸. ...
  • Dilghani, S., ۲۰۰۱. Concrete Technology, Tabriz University, Fourth Edition ...
  • EUROPEAN STANDARD, EN ۱۹۶-۱, ۲۰۱۸. Methods of testing cement ...
  • Handbook of refractory materials and building materials engineering, Industrial Force ...
  • Huang, H., Shen, X.D., ۲۰۱۰. Formulation design of the multi-component ...
  • Huang, H., Shen, X.D., Zheng J.L., ۲۰۱۰. Modeling, analysis of ...
  • Huang, H., Shen, X.D., ۲۰۱۱. Statistical study of cement additives ...
  • Iranian National Standard, ۲۰۰۴. The reference sand used in determining ...
  • ISIRI ۳۹۳, ۲۰۰۹. Cement – Determination of flexural and compressive ...
  • Mehdizadeh, M., ۱۹۹۳. Effect of chemical composition and physical properties ...
  • Mindess, S., and Young, J.F., ۲۰۰۴. Concrete, Prentice-Hall, Englewood Cliffs, ...
  • Mohamad, G., Lourenço, P.B., Camões, A, Roman, H.R., ۲۰۰۷. Estudo ...
  • Reddy, B. V. V., Gupta, A., ۲۰۰۸. Influence of sand ...
  • Riding, K., Silva, D.A., Scrivener, K., ۲۰۱۰. Early age strength ...
  • Taeb, A., Kouhi, F., ۱۹۹۴. Cement, Cement Research Center Publications, ...
  • Torreti, J.M., Benaija, E.H., Boulay, C., ۲۰۰۲. Influence of boundary ...
  • نمایش کامل مراجع