Drying Food Waste Using a Conventional Tray Cabinet Dryer
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 92
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_BBR-2-2_001
تاریخ نمایه سازی: 14 دی 1402
چکیده مقاله:
In order to reduce leachate from food waste a conventional tray cabinet dryer was designed and built, and the drying process of these wastes was investigated. A ۲.۷ kW heater equipped with an axial fan was used as the heating source. The experiments were performed at three temperatures of ۵۰, ۶۰, and ۷۰ °C and three air velocities of ۱, ۱.۵, and ۲ m/s with a thickness of ۳ cm. A conventional tray was used for drying. The Drying kinetics, effective moisture diffusivity and activation energy during drying of food waste were obtained. Results showed that improving air distribution in the back of the tray and no passing air on the sides of the tray causes that increase the drying rate significantly. The minimum drying process was occurred in temperature of ۷۰°C and air velocity of ۲ m/s at the ۱۲۰ min. Effective moisture diffusivity of waste food during the drying process was in the range of ۲.۷۴×۱۰-۹-۳.۶۵×۱۰-۸ m۲/s. The values for activation energy have ranged from a minimum of ۲۱.۶ kJ/mol in ۱.۵ m/s air velocity up to a maximum of ۶۴.۰ kJ/mol in ۲m/s air velocity.
کلیدواژه ها:
نویسندگان
Ahmad Khaloahmadi
Department of Biosystems, Eghlid Branch, Islamic Azad University, Eghlid, Iran.
Omid-Reza Roostapoor
Agricultural Engineering Research Institute, Agricultural Research, Education and Extension Organization, Karaj, Iran.
Behfar Farzaneh
Department of Biosystems, Eghlid Branch, Islamic Azad University, Eghlid, Iran.