Fabrication and numerical optimization of microfluidic-based spiral micromixer
سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 57
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_TJEE-53-4_005
تاریخ نمایه سازی: 20 دی 1402
چکیده مقاله:
In this paper, recommended spiral passive micromixer was designed and simulated. spiral design has the potential to create and strengthen the centrifugal force and the secondary flow. A series of simulations were carried out to evaluate the effects of channel width, channel depth, the gap between loops, and flowrate on the micromixer performance. These features impact the contact area of the two fluids and ultimately lead to an increment in the quality of the mixture. In this study, for the flow rate of ۲۵ μl/min and molecular diffusion coefficient of ۱×۱۰-۱۰ m۲/s, mixing efficiency of more than ۹۰% is achieved after ۳۰ (approximately one-third of the total channel length). Finally, the optimized design fabricated using proposed ۳D printing method.
کلیدواژه ها:
نویسندگان
سینا پورحاجی آقا گلستانی
دانشکده مهندسی برق دانشگاه صنعتی سهند
عادل پورمند
عضو هیئت علمی دانشکده مهدسی برق، دانشگاه صنعتی سهند
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :