اتصال متجانس سوپر آلیاژ Inconel ۶۰۰ با استفاده از پرکننده پودری نانو ساختار با طراحی آنتروپی بالا

سال انتشار: 1402
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 58

فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JWSTI-9-2_007

تاریخ نمایه سازی: 4 بهمن 1402

چکیده مقاله:

آلیاژهای  آنتروپی بالا بدلیل دارا بودن خواص عالی به ویژه برای کاربرد به عنوان فلزات پرکننده در لحیم کاری سخت مناسب هستند. در مطالعه حاضر، سه پودر با ترکیب CoxCrxCuxFexMnxNix (X درصد اتمی عنصر) با استفاده از ضوابط این آلیاژها و همچنین نرم افزار JMATPRO طراحی گردید. مرحله بعد با استفاده از آلیاژسازی مکانیکی، نانو پودر پرکننده سنتز شد و توسط آزمون آنالیز اشعه ایکس (XRD) مشخصه یابی و اثر ترکیب پرکننده بر رفتار حرارتی آلیاژ، مطالعه شد. سپس پرکننده در لحیم کاری سخت سوپر آلیاژ اینکول ۶۰۰ مورد استفاده قرار گرفت، رفتار انجماد تک فازی و عدم وجود بور و سیلیکون در پرکننده آنتروپی بالا منجر به ایجاد یک ریزساختار پیوسته بدون اجزای یوتکتیک یا فازهای شکننده در فصل مشترک لحیم کاری سخت گردید. بدین ترتیب آزمون استحکام برشی انجام شده وMPa  ۵۴۵ در بین سه ترکیب پرکننده، بالاترین استحکام برشی بود که بدست آمد. در لحیم هایی که از فلز پرکننده معمولی استفاده می کنند، انجماد همدما ناقص و متعاقب آن انجماد حرارتی مایع باقی مانده منجر به ایجاد فازهای شکننده می شود که در سراسر ریزساختار توزیع می شوند. عدم استفاده از ترکیبات پایین آورنده نقطه ذوب در پرکننده با هدف اتصال سوپر آلیاژ پایه نیکل، گامی مهم در کاهش فرایندهای بعدی لحیم کاری تلقی می شود.

نویسندگان

الهه منصوری

Engineering and Materials Science, KN Toosi University of Technology, Tehran.

حمید خرسند

Engineering and Materials Science, KN Toosi University of Technology, Tehran.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • W. Miglietti, Wide Gap Braze Repair of Gas Turbine Blades ...
  • H. Tazikeh, S. E. Mirsalehi, A. Shamsipoor, The effect of ...
  • M. Pouranvari, A. Ekrami, and A. H. Kokabi, Microstructure development ...
  • M. Pouranvari, A. Ekrami, and A. H. Kokabi, Effect of ...
  • A. I. Ghahferokhi et al., Effect of bonding temperature and ...
  • D. A. Gale, W. F., & Butts, Transient liquid phase ...
  • G. H. Superalloy et al., a ,lied sciences Effect of ...
  • A. Davoodi, A. Khorram, and A. Jafari, Characterization of microstructure ...
  • Y. H. Yang, Y. J. Xie, M. S. Wang, and ...
  • Y. H. Kim, K. T. Kim, and I. H. Kim, ...
  • Y. Hwan, I. Ho, and C. S. Kim, Effect of ...
  • Y. H. Kim and S. I. Kwun, Microstructure and Mechanical ...
  • A. Khorram, A. Davoodi Jamalooei, A. Jafari, On the microstructural ...
  • M. Du Toit, High Strength , Ductile Braze Repairs for ...
  • D. Bridges et al., Laser brazing of a nickel-based superalloy ...
  • W. Tillmann, T. Ulitzka, L. Wojarski, H. Ulitzka, and M. ...
  • Z. ۲۰۱۹ Gao, M., Schneiderman, B., Gilbert, S. M., and ...
  • L. Hardwick, P. A. T. Rodgers, E. D. Pickering, and ...
  • Z. Schneiderman, B., Chuang, A. C., Kenesei, P., and Yu, ...
  • V. A. Cantor B, Chang ITH, Knight P, Microstructural development ...
  • et al. Yeh, J.-W., Nanostructured high-entropy alloys with multiple principal ...
  • J. W. Yeh, Alloy design strategies and future trends in ...
  • J. Yeh, S. Chang, Y. Hong, S. Chen, and S. ...
  • K. Tsai, M. Tsai, and J. Yeh, Sluggish diffusion in ...
  • K. Jin, C. Zhang, F. Zhang, and H. Bei, Influence ...
  • F. Otto, Y. Yang, H. Bei, and E. P. George, ...
  • O. N. S. D.B. Miracle, A critical review of high ...
  • W. F. Gale and E. R. Wallach, Microstructural Development in ...
  • W. Hume-Rothery, Atomic Theory for Students of Metallurgy, London, UK ...
  • W. Hume-rothery and H. M. Powell, On the Theory of ...
  • C. W. Hume-Rothery, W., Smallman, R. E., and Haworth, The ...
  • Inconel Alloy ۶۰۰. ۲۰۰۸. Special Metals Corp. ...
  • L. P. Zhang Y, Zhou YJ, Lin JP, Chen GL, ...
  • M. Way, J. Willingham, R. Goodall, M. Way, J. Willingham, ...
  • et al. Gludovatz B, Hohenwarter A, Catoor D, A fracture-resistant ...
  • Z. Li, K. G. Pradeep, Y. Deng, D. Raabe, and ...
  • X. Wang et al., Laser assisted synthesis of Al۰.۱CoCrFeNi High ...
  • J. Wang, C. Wei, H. Yang, T. Guo, T. Xu, ...
  • Y. Zhang et al., Microstructures and properties of high-entropy alloys, ...
  • D. Bridges, S. Zhang, S. Lang, M. Gao, Z. Yu, ...
  • G. Wang et al., Brazing of Ti-coated SiC using a ...
  • W. Miglietti, Wide Gap Braze Repair of Gas Turbine Blades ...
  • H. Tazikeh, S. E. Mirsalehi, A. Shamsipoor, The effect of ...
  • M. Pouranvari, A. Ekrami, and A. H. Kokabi, Microstructure development ...
  • M. Pouranvari, A. Ekrami, and A. H. Kokabi, Effect of ...
  • A. I. Ghahferokhi et al., Effect of bonding temperature and ...
  • D. A. Gale, W. F., & Butts, Transient liquid phase ...
  • G. H. Superalloy et al., a ,lied sciences Effect of ...
  • A. Davoodi, A. Khorram, and A. Jafari, Characterization of microstructure ...
  • Y. H. Yang, Y. J. Xie, M. S. Wang, and ...
  • Y. H. Kim, K. T. Kim, and I. H. Kim, ...
  • Y. Hwan, I. Ho, and C. S. Kim, Effect of ...
  • Y. H. Kim and S. I. Kwun, Microstructure and Mechanical ...
  • A. Khorram, A. Davoodi Jamalooei, A. Jafari, On the microstructural ...
  • M. Du Toit, High Strength , Ductile Braze Repairs for ...
  • D. Bridges et al., Laser brazing of a nickel-based superalloy ...
  • W. Tillmann, T. Ulitzka, L. Wojarski, H. Ulitzka, and M. ...
  • Z. ۲۰۱۹ Gao, M., Schneiderman, B., Gilbert, S. M., and ...
  • L. Hardwick, P. A. T. Rodgers, E. D. Pickering, and ...
  • Z. Schneiderman, B., Chuang, A. C., Kenesei, P., and Yu, ...
  • V. A. Cantor B, Chang ITH, Knight P, Microstructural development ...
  • et al. Yeh, J.-W., Nanostructured high-entropy alloys with multiple principal ...
  • J. W. Yeh, Alloy design strategies and future trends in ...
  • J. Yeh, S. Chang, Y. Hong, S. Chen, and S. ...
  • K. Tsai, M. Tsai, and J. Yeh, Sluggish diffusion in ...
  • K. Jin, C. Zhang, F. Zhang, and H. Bei, Influence ...
  • F. Otto, Y. Yang, H. Bei, and E. P. George, ...
  • O. N. S. D.B. Miracle, A critical review of high ...
  • W. F. Gale and E. R. Wallach, Microstructural Development in ...
  • W. Hume-Rothery, Atomic Theory for Students of Metallurgy, London, UK ...
  • W. Hume-rothery and H. M. Powell, On the Theory of ...
  • C. W. Hume-Rothery, W., Smallman, R. E., and Haworth, The ...
  • Inconel Alloy ۶۰۰. ۲۰۰۸. Special Metals Corp. ...
  • L. P. Zhang Y, Zhou YJ, Lin JP, Chen GL, ...
  • M. Way, J. Willingham, R. Goodall, M. Way, J. Willingham, ...
  • et al. Gludovatz B, Hohenwarter A, Catoor D, A fracture-resistant ...
  • Z. Li, K. G. Pradeep, Y. Deng, D. Raabe, and ...
  • X. Wang et al., Laser assisted synthesis of Al۰.۱CoCrFeNi High ...
  • J. Wang, C. Wei, H. Yang, T. Guo, T. Xu, ...
  • Y. Zhang et al., Microstructures and properties of high-entropy alloys, ...
  • D. Bridges, S. Zhang, S. Lang, M. Gao, Z. Yu, ...
  • G. Wang et al., Brazing of Ti-coated SiC using a ...
  • نمایش کامل مراجع