Design, Simulation and Fabrication of a Compact Size Wideband Microstrip Band-stop Filter
محل انتشار: دومین کنفرانس ملی ایده های نو در مهندسی برق
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,343
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NCNIEE02_097
تاریخ نمایه سازی: 29 بهمن 1392
چکیده مقاله:
Design, simulation and fabrication of a compact size wideband microstrip band-stop Filter (MBsF) is presented in this paper. The main important advantages of this proposed MBsF are high rejection level, Low insertion loss in the passband and integrated configuration. RT_DURROID_5880 dielectric substrate with relative permittivity εr=2.21, thickness h=0.508 mm, is used. The radiating patch and the ground plane are on top and bottom of the dielectric substrate respectively, those made of copper material with thickness t=0.035 mm and conductivity σ=5.96e7 s/m. All steps of design and simulation are done by Advanced Design System (ADS) software. In addition, the MBsF prototype has been fabricated to validate the simulation results; and there is a close agreement between the simulated and measured results
کلیدواژه ها:
نویسندگان
Sepideh Ebrahimi
Department of Engineering, Aligoudarz Branch, Islamic Azad University, Aligoudarz, Iran
Alishir Moradikordalivand
Faculty of Electrical Engineering, Universiti Teknologi Malaysia, Johor, Malaysia
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :