Prediction of Maximum Throughput in Pulsed Disc and Doughnut Extraction Columns
محل انتشار: هفتمین کنگره ملی مهندسی شیمی
سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 691
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC07_106
تاریخ نمایه سازی: 25 فروردین 1394
چکیده مقاله:
Flooding behavior of a 76 mm diameter pulsed disc and doughnut column has been investigated using three different liquid-liquid systems. Flooding velocity and holdup at flooding have been measured at different operating conditions. The maximum throughput is influenced mainly bypulsation intensity and interfacial tension. The results also indicated that flood point data are wellcorrelated in terms of phase flow rates by the characteristic velocity method. Two precisecorrelations are proposed for predicting flooding velocities in this column. The first is based on operating variables, column geometry, and system physical properties. The second one considers the same variables, except column geometry. Good agreement between prediction and experiments is found for all operating conditions investigated.
کلیدواژه ها:
نویسندگان
meisam torab mostaedi
Nuclear Fuel Cycle Research School, Nuclear Science and Technology Research Institute, Tehran, Iran
mehdi Asadollahzadeh
Nuclear Fuel Cycle Research School, Nuclear Science and Technology Research Institute, Tehran, Iran
Pegah Pejmanzad
Nuclear Fuel Cycle Research School, Nuclear Science and Technology Research Institute, Tehran, Iran
Jafar Shokravian
Nuclear Fuel Cycle Research School, Nuclear Science and Technology Research Institute, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :