Effect of Simultaneous Cooling on Temperature Field in Friction Stir Welding Process of Aluminium Alloy
سال انتشار: 1393
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 702
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC03_027
تاریخ نمایه سازی: 9 فروردین 1395
چکیده مقاله:
In friction stir welding (FSW) process, heat generated due to friction between the tool and the workpiece and flows into the workpiece as well as the tool. The amount of heat conducted into the workpiece determines the quality of the weld microstructure transitions, residual stresses and distortion of the workpiece. In this study, a heat transfer model in both conventional and simultaneous cooling process of FSW of AL-5086 is proposed and simulated numerically. Comparison of model numerical simulation and experimental data indicates a good agreement. Consequently, from numerical simulations, optimizing the design of proper simultaneous cooling is performed for a suitable approach to reduce the welding distortions and residual stresses.
کلیدواژه ها:
نویسندگان
n jalili
Mechanical Engineering Department, Amirkabir University of Technology, Tehran, Iran
h basirat tabrizi
Mechanical Engineering Department, Amirkabir University of Technology, Tehran, Iran
I sattarifar
Mechanical Engineering Department, Amirkabir University of Technology, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :