Modeling of Coupled Heat and Fluid-Flow in a Fractured Block (Comparison between Variable Width Fracture and Constant Width Fracture)
محل انتشار: پنجمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,501
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC05_172
تاریخ نمایه سازی: 7 بهمن 1386
چکیده مقاله:
Despite major advances in recent years, mathematical modeling of fluid-flow and heat-flow in fractured reservoir remains a difficult problem. A numerical model is formulated that simultaneously describes the fracture behavior with consideration to fluid- flow and heat- flow. With this modeling, it is possible to predict the temperature and pressure profile during hot-fluid injection into an oil reservoir or cold-fluid injection into a geothermal reservoir.
A possibility to increase the recovery percentage, particularly in the case of highly viscous oils, is to supply heat to the reservoir so as to increase the temperature of the latter and to lower the viscosity of the oil. The purpose of this paper is to investigate the response of fractured rock of heavy oil reservoir with both constant and variable width of fracture to hot-fluid injection. The case is studied in which heat is supplied to
the reservoir by injection of hot fluid. Flow equations and heat equations of hot fluid injection into fractured reservoir with new assumption, which describes the change in fracture orientation are investigated. The model is also simulated by Eclipse 300.The graphs from numerical modeling and simulation are compared and same results are obtained. During hot fluid injection into fractured block model, the fracture withconstant width behaves like a horizontal fracture and the fracture with variable width behaves like a vertical one. This paper and related papers can increase the awareness of engineers about potential complication in fracture behavior when using hot-fluid injection, and to provide some guidelines on how to use this phenomenon to maximum benefit.
کلیدواژه ها:
نویسندگان
Negar Khoshnevis Gargar
Research Institute of Petroleum Technology
Reza Kamali
Research Institute of Petroleum Technology
Roozbeh Khosrokhavar
Research Institute of Petroleum Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :