Similarity of natural frequencies in cantilever beam with different single crack
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 495
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
این مقاله در بخشهای موضوعی زیر دسته بندی شده است:
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICSAU03_0403
تاریخ نمایه سازی: 12 تیر 1395
چکیده مقاله:
This paper is an attempt to identify the crack depth and location in cracked cantilever beam by the first three natural frequencies and using genetic algorithm. Detection is performed in two case frequencies, numerical and experimental frequency data. In the first case, an arbitrary depth and location for a crack were assumed and then frequencies were obtained from the numerical solution of frequency equation. Inversion of this case can be considered as a problem for identifying cracks. Identifications was carried out with a very high accuracy. In the second case, the experimental frequencies were given as inputs to genetic algorithm and then the genetic algorithm was run, and the resulted detection was not performed correctly. It will be shown that a negligible error in the measured frequencies is a symptom of incorrect detection. In the other words, there may be two different cracks that produce the same frequencies with certain accuracy
کلیدواژه ها:
نویسندگان
Vahid Darijani
M.SC. Graduate, Department of Civil Engineering, Shiraz University, Shiraz, Iran,
Abdolrasool Ranjbaran
Associate professor, Department of Civil Engineering, Shiraz University, Shiraz, Iran,
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :