Bituminous Blends for Different Coating Applications

سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,383

فایل این مقاله در 24 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

BITUMEN01_027

تاریخ نمایه سازی: 10 فروردین 1387

چکیده مقاله:

Bitumen is a very important component of anti-corrosion coatings and water proofing membranes which has found many applications. Depending on the application, bitumens have different compositions and physico-chemical properties. Softer bitumen is usually air-blown to adjust the physical properties of the final bitumen. Here, preparation of 60/70, 85/25 and 90/15 bitumens was achieved via physical mixing of air-blown 110/10 bitumen with 85/100 penetration grade and slops (HVS) cut. The softening point of the resulting bitumen changes with the asphaltenes’ heavy-vacuum content, whereas its penetration varies exponentially. This difference in behavior was attributed to the shear forces applied during the tests and was account for via the bitumen viscosity and cohesive energy acting between asphaltenes. Finally, some formulations for the target bitumens were reported via mixing of the above-mentioned raw-materials. J. Color Sci. Tech. 1(2007), 7-18. © Institute for Colorants, Paint and Coatings.

نویسندگان

v Haddadi

Department of Chemistry, Tehran North Islamic Azad University-Department of Chemistry, Islamshar Islamic Azad University

A.A Yousefi

Institute for Colorants Paint and Coatings (ICPC), Iran Polymer and Petrochemical Institute (IPPI), Plastic, Rubber, Composite Center of Excellence (PRC-CE)

M.T Ganji

Department of Chemistry, Tehran North Islamic Azad University

M Khosravi

Islamic Azad University, Tehran North branch, P.O. Box ۱۹۵۸۵/۹۳۶, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Jolitz R., Pierce H. H., Daniel S., Donoho D., An ...
  • Stam M. J., Key C., Bouw K.D., Glassmat as a ...
  • Allen D. J., Phalen JR T.E., Stress-strain characteri stics for ...
  • Brodland G. W., Dell M. J., Burnett E.F.P., Finite element ...
  • Jones P.M., Garden G.K., Properties of bituminous membranes, NRC-IRC, Canada, ...
  • Turenne R.G., Stenman H.K., Mech M.N., Dutt O., Single-ply membranes ...
  • _ J. Porcher, J.R., Herbert W.Busching. A laboratory investigation of ...
  • Hadadi V., Yousefi A.A., Moeini A.R., Ganji T., Khosravi M., ...
  • Hadadi V., Yousefi A.A., Ganji T. M., Khosravi M., The ...
  • Hadadi V., Yousefi A.A., Ganji T. M., Khosravi M., Mechanical ...
  • Steffe F. J, Rheological methods in food process engineering, Freeman ...
  • Ward I. M., Hadley D. W., An introduction to the ...
  • Ggriffin C.W., Fricklas R.L., The manual of low-slope roof system, ...
  • J. Christopher, A. S. Sarpal, G. S. Kapur, A. Krishna, ...
  • Gawrys K. L., How asphaltenes aggregate: role of chemistry and ...
  • Spiecker P. M. The impact of asphaltene chemistry and salvation ...
  • Fredrich F. Effect of non-condens able _ the vapex process, ...
  • The Shell Bitumen Handbook, Shell Oil Co., ch. 2, 1989 ...
  • Saniere A., Henaut I., Argillier J.F., Pipeline transition of heavy ...
  • Harris J., Electrically Conductive Latex-Based Composites, TiiMS 3rd Annual Review ...
  • نمایش کامل مراجع