Dynamic analysis of satellite sandwich panels: Experimental andNumerical approach
محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 520
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
WMECH03_061
تاریخ نمایه سازی: 26 شهریور 1395
چکیده مقاله:
The current investigation focuses on design, analysis and dynamic response of the sample of micro-satellite Aluminum panel structure. Aluminum face sheet sandwich panels have been manufactured and are studied. Modal tests have been performed with impact hammer equipment. Modal analysis have been done with 2D and 3D numerical models of sample satellite sandwich panel structure with commercial finite element (FE) code, ABAQUS 6.12.1. There is a good agreement between FE modeling and analytical stress results; also 6.73 % is the maximum discrepancy between numerical and experimental first 5th modal frequencies, also comparison between numerical predicted mode shapes and experimental ones implies a very good likeness.
کلیدواژه ها:
نویسندگان
M Shahravy
Associate Professor, Department of Aerospace Engineering, University of Malek-e-Ashtar, Lavizan, Tehran, Iran
M Mokhtari
PhD student, Department of Mechanical Engineering, University of Malek-e-Ashtar, Lavizan, Tehran, Iran.3 Senior Engineer, Shahid Ghandi Center of Research, Tehran, Iran.