Control of Polysulfone Ultrafiltration Membrane haracteristics byChanging Molecular Weight of additives and UV Irradiation Parameters
محل انتشار: دوازدهمین کنگره ملی مهندسی شیمی ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,930
فایل این مقاله در 12 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NICEC12_436
تاریخ نمایه سازی: 30 شهریور 1387
چکیده مقاله:
Ultrafiltration (UF) membranes were prepared via phase inversion method. Casting solution contained polysulfone (PSf) / N-methylen-2-pyrrolidone (NMP) / poly(ethylene glycol) (PEG) and water was used as coagulant media. PEG with different molecular weight was used as pore-former. The effect of molecular weight of PEG on permeation properties was evaluated. It can be observed that an increase in the molecular weight of PEG additive leads to an increase in water permeability. The effects of irradiation parameters such as irradiation
time and monomer concentration were evaluated. The results show that by increasing the irradiation time and monomer concentration, rejection of the organic materials increases; although solution permeability decreases. Grafting of Acrylic Acid (AA) onto surface of membranes confirmed by Infra Red spectra (IR).
کلیدواژه ها:
نویسندگان
M. Arami
۱Textile Engineering Department, Amirkabir University of Technology, Tehran, Iran
A. Akbari
NanoSciTech. Center, University of Kashan, Kashan, Iran
M Amini
Textile Engineering Department, Amirkabir University of Technology, Tehran, Iran
M. Homayoonfal
NanoSciTech. Center, University of Kashan, Kashan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :