Degradation at the Composites Interfacial Zones - A Micromechanical Computational Evaluation Procedure

سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,933

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICCE08_1041

تاریخ نمایه سازی: 28 آبان 1387

چکیده مقاله:

In this paper, a micromechanics computational algorithm for characterization of structures with unidirectional fibrous composites is introduced. The modeling accounts for the microstructural behavior as well as the interface properties at the microscale where the interface size is highlighted. The interface is simulated by cohesive zone elements. The constitutive materials for the cohesive zone are extracted from the experimental traction-separation relations. Repeating unit cells (RUCs) of the representative volume elements (RVE) of the composite is modeled under specified normal and shear kinematical and loading conditions. The behavior of such unit cells monitor the stiffening and degradation characterization of the composite with the interface stiffening, softening and debonding modeled in an accurate manner. The model is implemented for two examples with linear/nonlinear traction-separation behavior; significant differences in the composite behavior is observed when two different cohesive zone laws were implemented indicating that the shape of the softening zone is important in addition to the initial stiffness and peak stress in cohesive zone law. This micromechanical cohesive zone model is also implemented to examine the impact of adhesion for undulated fibers on the overall composite structure response. The composite strength and stiffness for all the cases examined are compared with the experimental data with good agreements.

نویسندگان

Ataur R. Syed

Department of Mechanical Engineering and Applied Mechanics, North Dakota State University, Fargo, ND ۵۸۱۰۸-۶۰۵۰, USA.

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Swaminathan, S. Pagano, N. J., Ghosh, S., (2006), *Analysis of ...
  • Benveniste, Y., (1985), _ the Effect of Debonding on the ...
  • Hashin, Z., (1990), _، Thermo elastic Properties of Fiber Composites ...
  • Needleman, A., (1992), _، M i c romechanical Modeling of ...
  • Tvergaard, V., (1990), ،Effect of Fiber Debonding in a Whi ...
  • Ghosh, S. Ling, Y. Majumdar B.S. and Kim R., (2000), ...
  • Scheider, I., (2001), Cohesive Model for Crack Propagation Analyses of ...
  • Ananth, C.R. and Chandra, N., (1995), ،Numerical modeling of fiber ...
  • Naik, A. Abolfathi, N. Karami, G. and Ziejewski, M., (2008), ...
  • Karami, G. and Garnich, M., (2005), ،Effective Moduli and Failure ...
  • Stecenko, T. and Piggott, M.R., (1997)، #Fiber Waviness and Other ...
  • Thomason, L., (1995), The interface region in glass fi ber-reinforced ...
  • Characteri zation in Composites with New Non -destructive Interphase"؛ , ...
  • ABAQUS (2006). Manual, Version 5.8, Habbit, Karlsson & Sorensen, Inc., ...
  • Swaminathan, S., Pagano, N.J. and Ghosh, S., (2006), *Analysis of ...
  • Kim, S-H. and Kim, C-G., (2008), Optimal Design of Composite ...
  • Sorensen, B.F. and Jacobsen, T.K., (2008) _، Ch aracterizing Delamination ...
  • Analysis in a Unid irectional C arbon/Epoxy Composite Material, ?' ...
  • Kim, B. C., and Lee, D. G., (2008), ، Development ...
  • De Moura, M. F.S.F., Gonclaves, J.P.M., Marques, A.T. and De ...
  • _ International Congress On Civil Engineering, May 11-13, 2009, Shiraz ...
  • نمایش کامل مراجع