Experimental study on flexural and shear behavior of steel beams using carbon laminate
محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 330
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT05_029
تاریخ نمایه سازی: 6 مهر 1397
چکیده مقاله:
In the present paper, results of an experimental study on strengthening and reinforcing of steel beams under mechanical loads have been presented. Totally, eight steel specimens with span’s lengths of 0.2, 0.5 meter were reinforced by carbon laminates and subjected to 3-point bending load. Two failure modes of shear yielding, flexuralyielding in the beams were examined. For specimens with failure modes of shear yielding, carbon laminates are used on web of beams and for specimens with failure modes of flexural yielding, carbon laminates are used on tensional and compressive flanges and compressive flanges of beams, respectively. The results showed a significant improvement in strength and ductility of steel beams
کلیدواژه ها:
نویسندگان
m shekarchi
Graduate Student, Department of civil Engineering, Sharif University and Technology, Tehran, Iran
a.r khaloo
Professor, Department of civil Engineering, Sharif University and Technology, Tehran, Iran