Numerical and experimental static bending analysis of composite sandwich panels with grid stiffened core before and after transverse impact loading

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 354

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT05_112

تاریخ نمایه سازی: 6 مهر 1397

چکیده مقاله:

Composite sandwich panels with grid stiffened core are composed of composite face sheets and lattice core. The influence of impact on the flexural strength of these structures is investigated both numerically and experimentally. Two similar specimens were fabricated. One of them was damaged due to the specified impact drop test. Both damaged and undamaged specimens were tested under three-point bending loads. The tests are simulated using ABAQUS commercial software. Comparisons show that the finite element method is an efficient way to reduce the time and cost for estimating bending strength of this type of structures, before and after impact loads. The results show that the energy absorption occurs in the structures mainly due to the induced damage in the impact region on the face sheet of the sandwich panel. Also, the impact in the sandwich face sheets, significantly decreases the flexural strength of the composite sandwich panels with grid stiffened core

نویسندگان

a.a Davoodabadi

M.Sc. Student, Composites Research Institute, Malek Ashtar University of Technology, Lavizan, Tehran, Iran.

a davar

Associate Professor, Composites Research Institute, Malek Ashtar University of Technology, Lavizan, Tehran, Iran.

j Eskandari Jam

Professor, Composites Research Institute, Malek Ashtar University of Technology, Lavizan, Tehran, Iran.