Computational Fluids Dynamics Simulation to Predict Vacuum Infusion Process
محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 412
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT05_121
تاریخ نمایه سازی: 6 مهر 1397
چکیده مقاله:
Vacuum infusion is one of the usual processes to build composite materials. To find the place for resin injection or vacuum suction, the experts usually employ their experiences. In this study a hemisphere is simulated by ANSYS-FLUENT 15 commercial software for prediction of vacuum infusion process to find the best place for resin injection as well as the number of required resin inlets. For the simulations, the hemisphere with radius of 300 mm considered and the fibers thickness of 5.53 mm as a porous medium with 0.494 porosity. Different conditions have investigated for the simulations of the geometry. The results showed that Computational Fluids Dynamics (CFD)simulation is a strong tool to predict the best condition for the vacuum infusion process
کلیدواژه ها:
نویسندگان
m Sharifpur
Senior Lecturer, Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria ۰۰۰۲, South Africa
m Mahdavi
PhD candidate, Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria ۰۰۰۲, South Africa
j.p Meyer
Professor, Department of Mechanical and Aeronautical Engineering, University of Pretoria, Pretoria ۰۰۰۲, South Africa