Fabrication of Copper-Titanium carbide/Alumina Nanocomposite by high energy ball milling
محل انتشار: ششمین کنفرانس بین المللی متالورژی پودر
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 323
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
PMAUTO06_015
تاریخ نمایه سازی: 23 آذر 1397
چکیده مقاله:
In this study, Cu.Al2O3.TiC was produced the mechanochemical method and milling. For this purpose; pure powders of CuO, Al, TiO2 and C was placed in the vial and milling process was carried out with milling speed of 350 rpm, 20:1 ball to powder ratio; for 20, 60, 100 and 140 hours at argon atmosphere. Milled powders with pure Cu powder milled for 10 hours prepared powder. Result of process was studied by SEM and XRD. The results indicate that two reinforcement (TiC and Al2O3) particles were uniform distributary in Cu matrix.
نویسندگان
Abdolreza Etemadi
Master student, Shahid Bahonar University of Kerman, Kerman, Iran
Shahriar Sharafi
Professor, Shahid Bahonar University of Kerman, Kerman, Iran