Study on the Effect of Miniaturization of Machine Tools on the Dimensional Surface Error in Peripheral Milling
محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,691
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME10_391
تاریخ نمایه سازی: 29 آبان 1388
چکیده مقاله:
In this paper, comparisons are made between the dimensional surface error of workpieces under peripheral milling with helical end mills, machined by a conventional size milling machine and by a desktop size milling machine. The effect of size miniaturization on the quality of the finished surface is studied. It is assumed that for both machines, the machining conditions are equal and the same tool is used. Separate formula are presented to evaluate the tool and machine static deflections. Dimensional analysis is used to study the effect of downsizing on the model parameters. Moreover, an experimental method is presented to be used for this comparison. Simulations are carried out to implement this method for a milling machine with real parameters.
کلیدواژه ها:
Desktop Machine Tools-Milling-Surface Error-Dimensional Analysis
نویسندگان
Milad Vazirian
M.Sc. Student, School of Mechanical Engineering, Sharif University of Technology
Mohammad-Reza Movahhedy
Associate Professor, School of Mechanical Engineering, Sharif University of Technology,
Javad Akbari
Associate Professor, School of Mechanical Engineering, Center of Robotics and Automation, Sharif University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :