A HIGH precision cmos bandgap reference based on a curvature correction circuit
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 358
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ECICONFE03_006
تاریخ نمایه سازی: 3 تیر 1398
چکیده مقاله:
This paper studies a high-precision low voltage bandgap reference (BGR) based on two conventional BRG cores. The proposed BRG employs a current mirror and a summing circuit to configure a curvature correction circuit. This circuit combines two curvature-down and curvature-up characteristics of both BRG cores to increase the precision of the reference voltage. The conventional folded cascode structure with a biasing circuit is used as the required amplifier in the BRG cores. Simulation results in a 130-nm CMOS technology show a temperature coefficient (TC) of 14.6 ppm/oC over a temperature range of 160 oC under a 1.2 V supply voltage. The power supply rejection ratio (CMRR) has a value of -36 dB at the frequency of 100 kHz
کلیدواژه ها:
نویسندگان
Meysam Akbari
Microelectronic Laboratory, Shahid Beheshti University , G.C., Tehran, Iran
Omid Hashemipour
with Faculty of Electrical Engineering, Shahid Beheshti University, G.C., Tehran, Iran