Performance, Thermal Stability and Optimum Design Analyses of Rectangular Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation
محل انتشار: مجله مکانیک کاربردی محاسباتی، دوره: 49، شماره: 1
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 297
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCAM-49-1_005
تاریخ نمایه سازی: 18 تیر 1398
چکیده مقاله:
In this study, we analysed the thermal performance, thermal stability and optimum design analyses of a longitudinal, rectangular fin with temperature-dependent, thermal properties and internal heat generation under multi-boiling heat transfer using Haar wavelet collocation method. The effects of the key and controlling parameters on the thermal performance of the fin are investigated. The thermal stability criteria and optimum design parameter were established. From the investigation, the study reveals that the performance of the fin is enhanced as the boiling condition parameter or the exponent decreases. It is also established that the optimum fin length (at which Q/ζ reaches a maximum value) increases as the non-linear thermal conductivity term β, increases. Furthermore, the study shows that the optimum value of M can be obtained based on the value of the non-linear term. The computational results obtained in this study were compared with established numerical solutions and is found to be in good agreement with the standard numerical solutions.
کلیدواژه ها:
Haar wavelet collocation method ، Multi-boiling heat transfer ، Longitudinal fin ، Thermal stability ، Optimum design ، Temperature-dependent thermal conductivity ، Internal heat generation
نویسندگان
George Oguntala
School of Electrical Engineering, Faculty of Engineering and Informatics, University of Bradford, Bradford, West Yorkshire, UK.
Raed Abd-Alhameed
School of Electrical Engineering, Faculty of Engineering and Informatics, University of Bradford, Bradford, West Yorkshire, UK.
Gbeminiyi Sobamowo
Department of Mechanical Engineering, Faculty of Engineering, University of Lagos, Akoka, Lagos, Nigeria.
Isa Danjuma
School of Electrical Engineering, Faculty of Engineering and Informatics, University of Bradford, Bradford, West Yorkshire, UK.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :