ورود
مقالات فارسیISIکنفرانسهاژورنالها

Cracking Elements Method for Simulating Complex Crack Growth

محل انتشار: مجله مکانیک کاربردی و محاسباتی، دوره: 5، شماره: 3
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 337

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:
https://civilica.com/doc/894041

شناسه ملی سند علمی:

JR_JACM-5-3_005

تاریخ نمایه سازی: 19 تیر 1398

چکیده مقاله:

The cracking elements method (CEM) is a novel numerical approach for simulating fracture of quasi-brittle materials. This method is built in the framework of conventional finite element method (FEM) based on standard Galerkin approximation, which models the cracks with disconnected cracking segments. The orientation of propagating cracks is determined by local criteria and no explicit or implicit representations of the cracks topology are needed. CEM does not need remeshing technique, cover algorithm, nodal enrichment or specific crack tracking strategies. The crack opening is condensed in local element, greatly reducing the coding efforts and simplifying the numerical procedure. This paper presents numerical simulations with CEM regarding several benchmark tests, the results of which further indicate the capability of CEM in capturing complex crack growths referring propagations of existed cracks as well as initiations of new cracks.

کلیدواژه ها:

Cracking elements method ، Fracture analysis ، Quasi-brittle material ، Complex crack growth

نویسندگان

Zizheng Sun

School of Civil and Transportation Engineering, Hebei University of Technology, Xiping Road ۵۳۴۰, ۳۰۰۴۰۱ Tianjin, China

Xiaoying Zhuang

Institute of Continuum Mechanics, Leibniz Universit¨at Hannover, Appelstraße ۱۱, ۳۰۱۵۷ Hannover, Germany | Department of Geotechnical Engineering, Tongji University, Siping Road ۱۲۳۹, ۲۰۰۰۹۲ Shanghai, China | State Key Laboratory for

Yiming Zhang

School of Civil and Transportation Engineering, Hebei University of Technology, Xiping Road ۵۳۴۰, ۳۰۰۴۰۱ Tianjin, China

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • H. Horii and T. Ichinomiya, Observation of fracture process zone ...
  • F. Wittmann and X. Hu, Fracture process zone in cementitious ...
  • R. de Borst, Some recent issues in computational failure mechanics, ...
  • J. Oliver, M. Cervera, and O. Manzoli, Strong discontinuities and ...
  • M. Cervera, M. Chiumenti, and D. D. Capua, Benchmarking on ...
  • J.-Y. Wu and M. Cervera, On the equivalence between traction- ...
  • L. Qing and Q. Li, A theoretical method for determining ...
  • L. Qing, M. Dong, and J. Guan, Determining initial fracture ...
  • P. Areias, T. Rabczuk, and D. Dias-da-Costa, Element-wise fracture algorithm ...
  • B. Schrefler, S. Secchi, and L. Simoni, On adaptive refinement ...
  • P. Areias and T. Rabczuk, Steiner-point free edge cutting of ...
  • X. Ren and J. Li, Dynamic fracture in irregularly structured ...
  • I. Khisamitov and G. Meschke, Variational approach to interface element ...
  • M. Cervera, M. Chiumenti, and R. Codina, Mixed stabilized finite ...
  • M. Cervera, M. Chiumenti, and R. Codina, Mesh objective modeling ...
  • M. Cervera, G. Barbat, and M. Chiumenti, Finite element modeling ...
  • C. Miehe, M. Hofacker, and F. Welschinger, A phase field ...
  • H. Badnava, M. Msekh, E. Etemadi, and T. Rabczuk, An ...
  • J.-Y. Wu, A unified phase-field theory for the mechanics of ...
  • J.-Y. Wu, A geometrically regularized gradient-damage model with energetic equivalence, ...
  • J.-Y. Wu and M. Cervera, A thermodynamically consistent plastic-damage framework ...
  • P. Areias, T. Rabczuk, and M. Msekh, Phase-field analysis of ...
  • F. Amiri, D. Mill´an, Y. Shen, T. Rabczuk, and M. ...
  • J. Wu, C. McAuliffe, H. Waisman, and G. Deodatis, Stochastic ...
  • S. Zhou, X. Zhuang, and T. Rabczuk, A phase-field modeling ...
  • S. Zhou, X. Zhuang, H. Zhu, and T. Rabczuk, Phase ...
  • J.-Y. Wu and V. P. Nguyen, A length scale insensitive ...
  • J.-Y. Wu, Robust numerical implementation of non-standard phase-field damage models ...
  • D. D. da Costa, V. Cervenka, and R. G. e ...
  • G. Ma, X. An, H. Zhang, and L. Li, Modeling ...
  • Y. Ning, Z. Yang, B. Wei, and B. Gu, Advances ...
  • H. Zheng and D. Xu, New strategies for some issues ...
  • H. Zheng, F. Liu, and X. Du, Complementarity problem arising ...
  • J. Wu and Y. Cai, A partition of unity formulation ...
  • H. Fan, H. Zheng, C. Li, and S. He, A ...
  • J. Oliver, I. Dias, and A. Huespe, Crack-path field and ...
  • C. Linder and F. Armero, Finite elements with embedded branching, ...
  • M. Motamedi, D. Weed, and C. Foster, Numerical simulation of ...
  • A. Tabarraei, J.-H. Song, and H. Waisman, A two-scale strong ...
  • E. Kishta, C. Giry, B. Richard, F. Ragueneau, and M. ...
  • T. C. Gasser and G. A. Holzapfel, Geometrically non-linear and ...
  • Z. Zhang, D. Wang, and X. Ge, A novel triangular ...
  • Z. Zhang, D. Wang, X. Ge, and H. Zheng, Three-dimensional ...
  • S. Saloustros, L. Pel a, M. Cervera, and P. Roca, ...
  • S. Saloustros, M. Cervera, and L. Pel a, Tracking multi-directional ...
  • M. Nikoli´c, A. Ibrahimbegovic, and P. Miscevic, Discrete element model ...
  • M. Nikoli´c, X. N. Do, A. Ibrahimbegovic, and Z. Nikoli´c, ...
  • J.-Y. Wu and F.-B. Li, An improved stable XFEM (Is-XFEM) ...
  • J.-H. Song, P. Areias, and T. Belytschko, A method for ...
  • T. Chau-Dinh, G. Zi, P.-S. Lee, T. Rabczuk, and J.-H. ...
  • S. Ghorashi, N. Valizadeh, S. Mohammadi, and T. Rabczuk, T-spline ...
  • T. C. Gasser and G. A. Holzapfel, Modeling 3D crack ...
  • Y. Wang and H. Waisman, From diffuse damage to sharp ...
  • Y. Wang, H. Waisman, and I. Harari, Direct evaluation of ...
  • Y. Wang and H. Waisman, Material-dependent crack-tip enrichment functions in ...
  • Y. Wang, C. Cerigato, H. Waisman, and E. Benvenuti, XFEM ...
  • T. Rabczuk and T. Belytschko, Adaptivity for structured meshfree particle ...
  • X. Zhuang, C. Augarde, and K. Mathisen, Fracture modeling using ...
  • X. Zhuang, C. Augarde, and S. Bordas, Accurate fracture modelling ...
  • T. Rabczuk, P. Areias, and T. Belytschko, A meshfree thin ...
  • T. Rabczuk, S. Bordas, and G. Zi, A three-dimensional meshfree ...
  • T. Rabczuk and G. Zi, A meshfree method based on ...
  • S. Bordas, T. Rabczuk, and G. Zi, Three-dimensional crack initiation, ...
  • T. Rabczuk, S. Bordas, and G. Zi, On three-dimensional modelling ...
  • Y. Cai, P. Sun, H. Zhu, and T. Rabczuk, A ...
  • Z.-J. Fu, W. Chen, and H.-T. Yang, Boundary particle method ...
  • H. Zhu, X. Zhuang, and Y. Cai, High rock slope ...
  • T. Rabczuk and T. Belytschko, Cracking particles: a simplified meshfree ...
  • T. Rabczuk and T. Belytschko, A three-dimensional large deformation meshfree ...
  • T. Rabczuk, G. Zi, S. Bordas, and H. Nguyen-Xuan, A ...
  • W. Ai and C. Augarde, An adaptive cracking particle method ...
  • S. Silling, Reformulation of elasticity theory for discontinuities and long-range ...
  • R. Macek and S. Silling, Peridynamics via finite element analysis, ...
  • S. Silling and E. Askari, A meshfree method based on ...
  • H. Ren, X. Zhuang, and T. Rabczuk, Dual-horizon peridynamics: A ...
  • H. Ren, X. Zhuang, and T. Rabczuk, Dual-horizon peridynamics: A ...
  • S. N. Butt, J. J. Timothy, and G. Meschke, Wave ...
  • Y. D. Ha and F. Bobaru, Studies of dynamic crack ...
  • T. Rabczuk and H. Ren, A peridynamics formulation for quasi-static ...
  • F. Han, G. Lubineau, Y. Azdoud, and A. Askari, A ...
  • F. Han, G. Lubineau, and Y. Azdoud, Adaptive coupling between ...
  • Y. Bie, X. Cui, and Z. Li, A coupling approach ...
  • H. Fei and L. Gilles, Coupling of nonlocal and local ...
  • M. Cervera, L. Pela, R. Clemente, and P. Roca, A ...
  • P. Dumstorff and G. Meschke, Crack propagation criteria in the ...
  • A. Alsahly, C. Callari, and G. Meschke, An algorithm based ...
  • M. Stolarska, D. Chopp, N. Mo¨es, and T. Belytschko, Modelling ...
  • F. Riccardi, E. Kishta, and B. Richard, A step-by-step global ...
  • C. Annavarapu, R. R. Settgast, E. Vitali, and J. P. ...
  • S. Saloustros, M. Cervera, and L. Pel a, Challenges, tools ...
  • Y. Zhang and X. Zhuang, Cracking elements: a self-propagating strong ...
  • T. Belytschko, J. Fish, and B. E. Engelmann, A Finite ...
  • Y. Zhang and X. Zhuang, Cracking elements method for dynamic ...
  • R. Larsson, K. Runesson, and S. Sture, Embedded localization band ...
  • J. Oliver, A. Huespe, and E. Samaniego, A study on ...
  • E. Samaniego, Contributions to the continuum modelling of strong discontinuities ...
  • Y. Zhang, R. Lackner, M. Zeiml, and H. Mang, Strong ...
  • G. Camacho and M. Ortiz, Computational modelling of impact damage ...
  • G. Meschke and P. Dumstorff, Energy-based modeling of cohesive and ...
  • S. Mariani and U. Perego, Extended finite element method for ...
  • T. Belytschko, D. Organ, and C. Gerlach, Element-free Galerkin methods ...
  • Y. Zhang and X. Zhuang, Cracking elements method for dynamic ...
  • Y. Zhang and X. Zhuang, A softening-healing law for self-healing ...
  • J. Oliver, A consistent characteristic length for smeared cracking models, ...
  • M. Jir´asek, Comparative study on finite elements with embedded discontinuities, ...
  • H. Lotfi and P. Shing, Embedded representation of fracture in ...
  • E. N. Dvorkin, A. M. Cuiti˜no, and G. Gioia, Finite ...
  • J. Oliver, Modelling strong discontinuities in solid mechanics via strain ...
  • J. Oliver, Modelling strong discontinuities in solid mechanics via strain ...
  • F. Armero and K. Garikipati, An analysis of strong discontinuities ...
  • J. Oliver, A. Huespe, M. Pulido, and E. Samaniego, On ...
  • R. I. Borja, A finite element model for strain localization ...
  • R. I. Borja, Finite element simulation of strain localization with ...
  • J. Oliver, A. Huespe, S. Blanco, and D. Linero, Stability ...
  • J. Mosler and G. Meschke, 3D modelling of strong discontinuities ...
  • C. Feist and G. Hofstetter, An embedded strong discontinuity model ...
  • C. Feist and G. Hofstetter, Three-dimensional fracture simulations based on ...
  • J. Simo and T. Hughes, Computational Inelasticity. Springer, 1998. ...
  • X. Ren and J. Li, Two-level consistent secant operators for ...
  • K.-J. Bathe, Finite Element Procedures (2nd edition). 2014. ISBN-10: 0979004950. ...
  • Y. Zhang, C. Pichler, Y. Yuan, M. Zeiml, and R. ...
  • Y. Zhang, M. Zeiml, C. Pichler, and R. Lackner, Model-based ...
  • Y. Zhang, M. Zeiml, M. Maier, Y. Yuan, and R. ...
  • Y. Zhang, Multi-slicing strategy for the three-dimensional discontinuity layout optimization ...
  • Y. Zhang and X. Zhuang, Stability analysis of shotcrete supported ...
  • C. Xiong, L. Cheng, F. Tong, and H. An, Oscillatory ...
  • Z. Fu, W. Chen, P. Wen, and C. Zhang, Singular ...
  • S. Lin, Y. Xie, Q. Li, X. Huang, and S. ...
  • Z. Sun, X. Yan, R. Liu, Z. Xu, S. Li ...
  • Z. Sun, X. Yan, W. Han, G. Ma and Y. ...
  • N. A. Al-Shayea, Crack propagation trajectories for rocks under mixed ...
  • P. Areias, M. Msekh, and T. Rabczuk, Damage and fracture ...
  • M. Ambati, T. Gerasimov, and L. De Lorenzis, A review ...
  • T. Bittencourt, P. Wawrzynek, A. Ingraffea, and J. Sousa, Quasi-automatic ...
  • A. Mesgarnejad, B. Bourdin, and M. Khonsari, Validation simulations for ...
  • P. Areias, T. Rabczuk, and D. Dias-da-Costa, Element-wise fracture algorithm ...
  • Y. Wang and H. Waisman, An arc-length method for controlled ...
  • Y. Wang and H. Waisman, Progressive delamination analysis of composite ...
  • S. May, J. Vignollet, and R. de Borst, A new ...
    • نمایش کامل مراجع