Investigating LES Turbulence Model in Modeling the Velocity Distribution Around the Hydraulic Structure Using ANSYS
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 359
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JCEMA-1-2_001
تاریخ نمایه سازی: 2 مهر 1398
چکیده مقاله:
Spur dikes are river training structures used for prevention of erosion at river banks and cause distancing of flow from the critical zone and creation of local contraction in water flow. In the present study, 2D modeling of the flow pattern around a spur dike in a straight canal with 6m length and 0.45m width is presented. Also the finite element method is utilized for solving the differential equations. Modeling of the turbulent flow around a single spur dike is performed using k- model in ANSYS software and the results were compared to those of the experimental study. The results show that the finite element method, by incorporating the k- model, models the flow pattern around the spur dike well and yields an average error value of 12.57%, and this shows a good agreement between the numerical modeling results and those of the experimental study.
کلیدواژه ها:
نویسندگان
Ahmad Safari
Investigating LES Turbulence Model in Modeling the Velocity Distribution Around the Hydraulic Structure Using ANSYS
Behrooz Moradi Mofrad
Department of Civil Engineering, Yasuj Branch, Yasouj University, Kohgiluyeh and Boyer Ahmad, Iran.
Sayed Hamid Reza Barnjani
Department of Civil Engineering, Bushehr Unit, Islamic Azad University, Bushehr, Iran.
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :