Studies on Mechanical and Thermal Properties of PP with Natural Carbon Powder
محل انتشار: نشریه متدهای شیمیایی، دوره: 3، شماره: 2
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 314
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_CHM-3-2_005
تاریخ نمایه سازی: 20 مهر 1398
چکیده مقاله:
The work has to develop polypropylene (PP) mixed for the purpose of compatible into the Prosopis juliflora bark powder (PB), Wheat husk carbon powder (WC) and Banyan carbon powder (BBC) using renewable bio resources. PB, WC and BBC were used as filler. They are relatively inexpensive and abundantly available in nature. The waste management were collected the wasted. PB, WC and BBC have been incorporated with composites. The mechanical and thermal studies were carried out to evaluate the effect of filler content on PP. The above filler has been studied for the mechanical and thermal properties increase with an increase in the filler content at optimum level 3% by weight. The tensile property of treated composites shows a higher value than neat PP matrix. The properties has been analyzed the variation value depend upon the porosity of the carbon and mixing the polymer composites.
کلیدواژه ها:
نویسندگان
A.U Santhoskumar
Depatment of chemical Engineering, Dr. MGR Educational Research Institute University, Chennai-۹۵, India
N. Jaya Chitra
Depatment of chemical Engineering, Dr. MGR Educational Research Institute University, Chennai-۹۵, India
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :