Shock Wave Sintering of Metal Matrix Nano-composites
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 270
نسخه کامل این مقاله ارائه نشده است و در دسترس نمی باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME24_653
تاریخ نمایه سازی: 21 مهر 1398
چکیده مقاله:
The aim of the current study is to investigate the mechanical properties of Aluminum Silicon Carbide (ALl SiC) nano-composites produced using shock sintering. In the first step, the shock response of a mixture of aluminum and silicon carbide nanoparticles is studied. The effect of an initial pressure before the shock passage is also scrutinized. Initial pressure results in a lower temperature rise and higher shock velocity. In order to determine the mechanical properties of final products the tmiaxial tension test is simulated. It is illustrated that shock wave passage leads to the production of fiber reinforced nano-composites with superior mechanical properties. Comparing the Hugoniot curves of silicon carbide obtained in the current study with those available in the literature, results are verified.
نویسندگان
Mahdi Tavakol
Mechanical Engineering Department, Sharyr University of Technology;
Maryam Mahnamaz
Mechanical Engineering Department, Sharyr University of Technology;
Reza Naghdabadi
Mechanical Engineering Department and Institute for Nanoscience and Technology, Sharp University of Technology;