Investigation of Parameters Effect Resin Movement Velocity at Vacuum Assisted Resin Transfer Molding Method (VARTM)
سال انتشار: 1392
نوع سند: مقاله ژورنالی
زبان: فارسی
مشاهده: 148
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_MPMPJ-2-1_001
تاریخ نمایه سازی: 24 مهر 1400
چکیده مقاله:
In this paper, Vacuum Assisted Resin Transfer Molding (VARTM) method was simulated by analytical solution. Then the effect of parameters like fiber density, distribution of layer thickness, perform layer thickness, resin viscosity was investigated theoretically. Obtained results show that by selecting optimum distribution layer thickness, increasing fiber volume fraction, reducing viscosity of resin, maximum speed could be achieved in the process in such a way by optimizing these parameters the production speed will be improved.
کلیدواژه ها:
نویسندگان
Sajad Rajabi Jalal
M.Sc Graduated, Departmant of Mechanical Engineering, Tarbiat Modarres University
Mohammad Golzar
Assistant Prof., Department of Mechanical Engineering, Tarbiat Modarres University