ورود
مقالات فارسیISIکنفرانسهاژورنالها

EVALUATION OF EFFECTIVE MATERIAL PROPERTIES OF RANDOMLY DISTRIBUTED CARBON NANOTUBE COMPOSITES CONSIDERING INTERFACE EFFECT

محل انتشار: کنفرانس ملی مهندسی مکانیک ایران
سال انتشار: 1392
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,006

فایل این مقاله در 17 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:
https://civilica.com/doc/247518

شناسه ملی سند علمی:

NCMII01_022

تاریخ نمایه سازی: 22 اردیبهشت 1393

چکیده مقاله:

The superlative mechanical properties of carbon nanotubes (CNTs) make them the filler material of choice for composite reinforcement. Substantial improvements in mechanical properties of polymers have been attained through the addition of small amounts of carbon nanotubes. The way in which CNTs are distributed inside the matrix can be divided into two main categories namely: aligned and randomly distributed. In this research the effect of both aligned and randomly distributed carbon nanotubes on the effective material properties of nanocomposite is investigated. In addition, effect of CNT/Matrix interface strength on the carbon nanotube reinforced polymer mechanical properties is considered. Theory of elasticity of anisotropic materials and finite element approach are used for the estimation of the effective material properties of randomly oriented carbon nanotube reinforced composites. Nanocomposite mechanical properties are evaluated using a square 3D nanoscale Representative Volume Element (RVE). RVEs consisting of aligned and randomly oriented CNTs are modeled to investigate the effects of nanotube dispersion on nanocomposite mechanical properties. The computational results indicated that mechanical properties of nanocomposite are remarkably dependent on the dispersion of the CNTs and also CNT/Matrix interface strength

کلیدواژه ها:

Nanocomposite ، Carbon nanotube ، Mechanical properties ، CNT dispersion ، Randomly distributed

نویسندگان

Hossein Mamanpush

Mechanical Engineering Departement, University of Shahrekord, Shahrekord, Iran

Hossein Golestanian

Faculty of Engineering, University of Shahrekord, Shahrekord, Iran Nanotechnology Research Center, University of Shahrekord, Shahrekord, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Guz, I. A, Rodger, A. A, Guzand, A. N, Rushchitsky, ...
  • Collins, P. G and Avouris, P. (2000): Nanotubes for electronic, ...
  • Li, C. Y and Chou, T. W. (2003): A structural ...
  • Chang, T and Gao, H. (2003): S ize-Dependent elastic properties ...
  • Krishnan, A, Dujardin, E, Ebbesen, T. W, et al. (1998): ...
  • Yao, N and Lordi .(1998): Young's modulus of single-walled carbon ...
  • Lu, J. P. (1997): Elastic properties of carbon nanotubes and ...
  • Thostenson, E. T, Li, C and Chou, T. W. (2005): ...
  • Qian, D, Wagner, G. J, Liu W. K, et al. ...
  • Srivastava, D, Wei, C and Cho, K. (2003): Nanomechanc S ...
  • Liu, B, Huang, Y, Jiang, H, et al. (2004): The ...
  • Nasdala, L and Ernst, G. (2005): Development of a 4-node ...
  • Pipes, R. _ and Hubert, P. (2002): Helical carbon nanotube ...
  • Das, P. S and Wille, L. T. (2004): Atomistic and ...
  • Xu, L. R and Sengupta, S. (2005): Interfacial stress transfer ...
  • Kulkarni, M, Carnahan, D, Kulkarni, K, et al. (2010): Elastic ...
  • Valavala, P. K and Odegard, G. M. (2005) :Modeling techniques ...
  • Liu, Y, Nishimura, N and Otani, Y. (2005): Large-scale modeling ...
  • Chen, H, Liu, X and Gengkai, H. (2998): Overall plasticity ...
  • -[20] Chen, X. L and Liu, Y. J. (2004): Square ...
  • Golestanian, H and Shojaie, M. (2010): Numerical _ haracterization of ...
  • Bogdanivich, A. E and Bradford, P. D, (2010): Carbon nanotube ...
  • Golestanian, H and Matin Ghahfarokhi, Z. (2011): Effects of nanotube ...
  • Shady, E, Gowayed, Y. (2010): Effect of nanotube geometry On ...
  • Wang, S. (2008) Role of structure and morphology in the ...
  • Joshi, U. A, Sharma Satish, C and Harsha, S. P. ...
  • Lekhnitskii, S. G. (1981): Theory of elasticity of an anisotropic ...
  • Joshi, U. A, Sharma, S. C and Harsha, S. P. ...
    • نمایش کامل مراجع