ورود
مقالات فارسیISIکنفرانسهاژورنالها

Creep and Recovery Behaviors of Using Graphene/ Epoxy, MWCNT/Epoxy and Graphene/MWCNT/Epoxy Nanocomposites

محل انتشار: کنفرانس دو سالانه بین المللی مکانیک جامدات تجربی
سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 672

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:
https://civilica.com/doc/510098

شناسه ملی سند علمی:

WMECH03_007

تاریخ نمایه سازی: 26 شهریور 1395

چکیده مقاله:

The creep and recovery behaviors of graphene/ epoxy, MWCNT/ epoxy and graphene, MWCNT/ epoxy nanocomposites were investigated by the DMTA testing. No difference was observed in creep behaviors of the neat epoxy and nanocomposites at low stress and ambient temperature. At elevated temperatures (below the glass transition temperature, Tg) the creep resistance of all nanocomposites were increased in comparison with that of the neat epoxy. It is observed that MWCNT nanofiller had the most influence on increasing of the creep resistance of epoxy (61%) and decreasing the unrecovered strain (69%). The experiments also showed that the creep resistance of graphene/epoxy and graphene/MWCNT/epoxy nanocomposites was increased by 42 and 40, respectively. The experimental results showed that adding the graphene platelets cannot decrease the creep strain of the epoxy as much as the MWCNT. Finally, rheological models were employed and long term creep and recovery of the nanocomposites were predicted.

کلیدواژه ها:

Creep ، Recovery ، Epoxy ، Graphene ، CNT ، Hybrid Nanocomposite

نویسندگان

M. M. Shokrieh

Professor, Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran

z Shokrieh

Ph.D. Student,Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran

Alaei M

M.Sc. Student,Mechanical Engineering, Iran University of Science and Technology, Tehran, 16846-13114, Iran

Zhao Z

Professor,Department of Chemical Engineering, Shandong University of Technology, Shandong, 255049 Zibo, PR China